Products

CARPOL® TEAP-265 is a triethanolamine-initiated polyether polyol. The resultant material has a nominal functionality of three and a typical hydroxyl number of 635. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. Primarily used as a rigid polyol modifier, CARPOL® TEAP-265 can be used to cut the high viscosity seen with most sucrose based rigid polyols while acting as a good crosslinker. In addition, this polyol contains amine which enhances the overall system reactivity.

CARPOL® GSP-7216 is a glycerin-initiated polyether polyol formulated to a nominal functionality of 4.2 and a typical hydroxyl value of 31. This ethylene oxide capped polyol is designed to provide a moderate degree of cross-linking and reactivity for high resiliency flexible foam applications. Advantages of using this polyol include increased load bearing, enhanced compression set performance, and the potential for reduced use of graft polyol.

CARPOL® PGP-400 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-400 has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

Bluesil™ EMUL 269 is an aqueous macro-emulsion of an hydrogeno-polysiloxane.

CARPOL® SP-477 is a sucrose-initiated polyether polyol. The high functionality of the initiator yields a resultant polyol with a nominal functionality of five and a typical hydroxyl value of 470. Due to this polyol’s functionality, its niche is rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, CARPOL® SP-477 is a neutral material, which presents the formulator with complete catalytic control over a system.

CARPOL® PES-295 is designed for use in rigid polyurethane and polyisocyanurate foam systems. With its aromatic composition, CARPOL® PES-295 exhibits heightened insulation and thermal stability leading to improved energy efficiency. CARPOL® PES-295 has both high functionality and aromatic content which yields a highly crosslinked foam and allows for lower flame retardant levels.