Products

XIBOND® 280 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77D is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297, it owns good heat resistance,weather resistance,adhesive and high temperature performance.

HFGEL 120-0 is an organophilic clay designed for use primarily in systems containing aliphatic to aromatic solvents such as xylene, toluene, mineral spirits, and naphtha.

MAGNESIUM STEARATE SW/F - US is a low to medium bulk density, fine white powder.

APODIL 1014 is a high viscosity, aliphatic polyepoxide (tetra-functional or higher) reactive diluent based on sorbitol or glucitol (bio-based). It is compatible with all types of epoxy resins in any proportion.

Baling® YH-502T is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30%mass.

HIRENOL® PL-500 has low viscosity, low volatile extender for epoxy, polyurethane and acrylic. Act as a plasticizer, pot-life controller, diluent, modifier. Good color and excellent UV-resistance. Wide process window, non-toxic, good compatibility, storage stability. Excellent performance in adhesion, hardness, water resistance, gloss, toughness, exduation, shrinkage, self-leveling, trowelability.

PURMOL™ 4ST is a sodium (Na) type A zeolite with a pore size of approximately 4 Angstroms (0.4 nm). PURMOL™ 4ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate. With metal dust coatings we recommend the addition of 0.5% - 2% PURMOL™ 4ST powder.

XIBOND® 220 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

Flexricin® 15 is a di-hydroxy ester that is effective as a plasticizer and lubricant. It is a more viscous castor-based ester and will impart hydrocarbon resistance to plug-valve greases with good low temperature and low viscosity properties.

Castorwax® is a wax like compound obtained by the controlled hydrogenation of pure castor oil. The principle constituent is glycerol tri-(12-hydroxystearate), also known as opalwax. Castorwax® is a hard, brittle, high melting point wax that is insoluble in most organic solvents but is highly compatible with most resins and waxes.

CALCIUM STEARATE VSA-325 is a low bulk density, very fine, white powder.

B 4011 is a liquid Bio-plasticizer for PVC.

Pale 4 polymerized castor oil oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents. Pale 4 polymerized castor oil is used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. It is a processing aid and plasticizer for rubber polymers.

XIBOND® 180 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.