Products

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

KRYSTOL™ 150 functions as a plasticizer and lubricant (internal and fiber lubricant) used in leather processing and home care polishes.

MACROLEX® Yellow 6G FG/OF is a methine dye used in plastics and elastomers for household goods and toys.

Synthomer ADS H190 is a medium to high molecular weight, solid polyvinyl acetate. It is and adhesives or met designed for use in solvent based coatings, inks extrusion systems. profile additive in Synthomer ADS H190 can also be used as a low unsaturated polyester processes. composites, typically pultrusion and BMC processses

DERTOPHENE® 1510 is a high softening point terpene phenolic resin with high polarity. Thanks to its excellent compatibility with chloroprene and acrylics, this resin improves adhesion, peel strength by preserving outstanding cohesive balance.

3M™ Glass Bubbles XLD3000 are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime-borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

EVATANE® 24-03 is a random ethylene-vinyl acetate copolymer.

Rilsan® BMV BLACK T is polyamide 11 produced from a renewable source. Rilsan® BMV BLACK T is designed for injection molding.

Rilsan® BESNO TL is a polyamide 11 produced from a renewable source. Rilsan® BESNO is designed for extrusion.

Baerostab® B 1936 is a Barium/Zinc Liquid Stabilizer.

Baerolub® FTA VEG is a relatively high bulk density, free flowing flake (SMS) or prill (SP) forms.

3M™ Glass Bubbles K1 are specially formulated for a high strength-to-weight ratio. This allows greater survivability under many demanding processing conditions, such as injection molding. They also produce stable voids, which results in low thermal conductivity and a low dielectric constant. 3M glass bubbles are available in a variety of sizes and grades to help you meet your product and processing requirements.

Rilsan® BESHV BLACK T is an ultra high viscosity Polyamide 11 grade specifically designed to be extruded into large diameter thick wall pipe. Rilsan® BESHV BLACK T has been specifically engineered to achieve an outstanding balance of properties for Oil and Gas piping applications. It offers a cost effective system for non-metallic corrosion free fluid transfer in critical Oil and Gas industry applications. Rilsan® Polyamide 11 is the only thermoplastic material permitted by the US Department of Transportation (DOT) under the Code of Federal Regulations (CFR) Title 49, Part 192, for gas distribution piping to be installed and operated at pressures up to and including 200 psi in a design factor of 0.40

Bayferrox® TP 5272 is a single-ingredient inorganic pigment, known as Iron Oxide Red. It belongs to the iron oxides chemical family. It is categorized as Pigment Red 101.

Baerostab® MC 3058 KA is an aluminum magnesium compound-based stabilizer used in polyvinyl chloride (PVC) applications. It acts as an acid scavenger and heat stabilizer, offering enhanced heat stability to PVC formulations. This stabilizer is specifically designed to improve the long-term performance and durability of PVC materials. Baerostab® MC 3058 KA also functions as a PVC stabilizer, ensuring the material maintains its integrity and resistance to degradation under heat and environmental conditions.