Products

Dynasylan® SIVO 112 resembles a hydro- and oleophobic additive for Dynasylan® SIVO 110, a novel water-borne, sol-gel binder system.

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

GENIOPLAST® PELLET S is a pelletized silicone gum formulation with an outstanding high loading of ultrahigh molecular weight siloxane polymer.

Bayferrox® TP 5277 is a single-ingredient inorganic pigment, known as Iron Oxide Red. It belongs to the iron oxides chemical family. It is categorized as Pigment Red 101.

LOTADER® 4700 is a random ethylene-ethyl acrylate-maleic anhydride terpolymer. Acrylic ester brings softness and polarity, while keeping high thermal stability during processing. The high content of acrylic ester leads to high flexibility (low-crystallinity) and high impact absorption behavior. Maleic anhydride provides reactivity (towards OH and NH2 groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. LOTADER® 4700 is suitable as modifier to improve the impact strength of polyamides (PA6, PA66, PA12...). It can also be used as a compatibiliser for polyamides/polyolefins blends.

KRONOS® 2233 is a pigment compatible with ceramic substrates, used in coatings for glass, paper, plastic, and vitreous enamel, as well as in printing inks.

ELIX™ 158 I is a high rubber content Acrylonitrile Butadiene Styrene modifier used to improve toughness of engineering thermoplastics and PVC.

AEROSIL® 300 is a hydrophilicfumed silica with a specific surface area of 300 m²/g. Itprovides a verystrong rheologicaleffect.

Dynasylan® GLYMO is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® GLYMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYMO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.

Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier.

3M™ Glass Bubbles S28HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

NuTone® 310 is a regular color, low structure powder furnace black suitable for a variety of pigmenting applications in inks.

Bayferrox® 6622 T is an inorganic pigment made from iron(III) oxide, used in various applications requiring pigmentation with iron-based compounds.

Dynasylan® VTMO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. The dual nature of its reactivity allows Dynasylan® VTMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as a crosslinking agent, adhesion promoter and/or surface modifier. Dynasylan® VTMO is a colorless, low-viscosity liquid with a typical aromatic odor.

Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.