NuTone® 310

NuTone® 310 is a regular color, low structure powder furnace black suitable for a variety of pigmenting applications in inks.

Principal: PCBL Limited

Pigment Type: Inorganic Pigments

Functions: Pigment, Pigment

Chemical Family: Carbon Blacks

End Uses: Coldset Ink, Flexography Ink, Gravure Ink, Heatset Ink, Letterpress Ink, Offset Ink, Rubber Goods, Sheet-Fed

  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
CASE Ingredients Functions
Chemical Family
Chemical Name
EC Number
215-609-9
Pigment Type
Plastics & Elastomers Functions
Product Code
MITM15659
Single Ingredient
Yes
Synonyms
Acetylene Black, Furnace Black, Lamp Black, Thermal Black
Technologies
Product Families

Features & Benefits

Applications & Uses

Ink & Toner End Applications
Plastics & Elastomers End Uses
Markets
Applications
Product Applications
  • Its low structure and dispersion ability make this product a best-optimized product between color and viscosity in a variety of ink applications.
  • NuTone® 310 is particularly suitable for web offset, coldest, heat set, sheetfed and letterpress printing inks and a broad field of liquid ink applications Gravure and Flexo.
  • It provides good viscosity and flow properties while maintaining ease of dispersion. The dispersion of NuTone® 310 carbon black depends on the equipment used and the formulation.

Properties

Regulatory & Compliance

Quality Standards

Packaging & Availability

Packaging Type

Principal Information

Group Principal Number
S003252
Principal

Other

ADR/RID/ADN Proper Shipping Name
Not Applicable
ADR/RID/ADN UN Number
Not Applicable
Appearance
Black powder
Appearance (SDS)
Black color
Dust Explosion Class (SDS)
ST1
Dust Explosion Class (SDS)
ST1
Explosive Nature (SDS)
Dust may form explosive mixture in air
IATA/ICAO Proper Shipping Name
Not Applicable
IATA/ICAO UN Number
Not Applicable
IMO/IMDG Proper Shipping Name
Not Applicable
IMO/IMDG UN Number
Not Applicable
Insoluble in (SDS)
Water
Item Number
Odor (SDS)
Odorless
Other Hazards
This substance is classified as hazardous as a combustible dust by the United States 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200), May cause reversible mechanical irritation to the eyes, skin and respiratory tract especially at concentrations above the occupational exposure limit, Do not expose to temperatures above 300°C.
USA/DOT UN Number
Not Applicable
Optical Properties
ValueUnitsTest Method / Conditions
Color Intensity103.0 %%
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life0.0 dd
Physical Properties
ValueUnitsTest Method / Conditions
Heating Loss0.6 %%as shipped
Sieve Fractionation (Retained)20.0 ppmppm325 µm
Specific Surface Area66.0 m²/gm²/g
Specific Surface Area66.0 m²/gm²/gnitrogen
Material Composition
ValueUnitsTest Method / Conditions
Peroxyacyl Nitrate Content0.46 cm³/gcm³/g
Application Information
ValueUnitsTest Method / Conditions
Dosage (Use Level)10.0-15.0 %%Gravure Inks
Dosage (Use Level)15.0-20.0 %%offset inks
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Autoignition Temperature (SDS)min. 140.0 °C°C
Bulk Density (SDS)200.0-680.0 kg/m³kg/m³granules
Bulk Density (SDS)100.0-420.0 kg/m³kg/m³Powder
Bulk Density (SDS)200.0-680.0 kg/m³kg/m³water = 1, Granules
Bulk Density (SDS)100.0-420.0 kg/m³kg/m³water = 1, Powder
Explosion Limit (SDS)50.0 g/m³g/m³VDI 2263 Furnace black, dust, Lower
Explosive Pressure (SDS)10.0 barbar
Explosive Pressure Rise Rate (SDS)30.0-100.0 bar/sbar/s
Ignition Energy (SDS)min. 10000.0 MJMJVDI 2263
Initial Boiling Point (SDS)min. 4000.0 °C°C
Lower Explosive Limit (SDS)50.0 g/m³g/m³VDI 2263 dust, furnace black
Maximum Explosion Pressure (SDS)10.0 barbar
Minimum Ignition Energy (SDS)min. 10000.0 MJMJVDI 2263
Minimum Ignition Temperature (SDS)min. 500.0 °C°CBAM Furnace cloud
Minimum Ignition Temperature (SDS)min. 500.0 °C°CVDI 2263 cloud
Minimum Ignition Temperature (SDS)min. 400.0 °C°CVDI 2263 layer
Molecular Weight (SDS)12.01 g/molg/mol
Relative Density (SDS)1.7-1.9-at 20°C
Relative Density (SDS)1.7-1.9-at 20°C, Water = 1
Volatile Content (SDS)max. 2.5 %(V/V)%(V/V)non-oxidised carbon black
Volatile Content (SDS)2.0-8.0 %(V/V)%(V/V)oxidised carbon black
pH (SDS)2.0-10.0-at 20°C, 50 g/l H₂O
pH (SDS)2.0-10.0-at 20°C, 50 g/L, water, as supplied