Products

Elevast™ A80 modifiers are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

PM-2000-90 is an MDI-based polyester polyol urethane binder. It is designed for use in systems where medium processing times are required and lipophobic characteristics are desired.

Hostastat® FE 2 P is a fatty acid ester which provides highly effective internal antistatic properties to thermoplastic polymers.

Elevast™ C30 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

AEROSIL® R 711 is a fumed silica aftertreated with a methacrylsilane.

MAGNESIUM STEARATE SW/F 1-US is a low to medium bulk density, fine white powder.

MITM13290 ELIX™ ABS CG28 Pellets is a high rubber content ABS copolymer with very high toughness and medium flow. Excellent impact and fracture resistance even at very low temperatures.

MKOREZ® HRR-100 is organic silane modified hydrocarbon resin. HRR means High Reactive Resin, as it can be cured by moisture and heat. This grade is especially designed for reactive hot-melt adhesive and can be used with reactive polyolefin materials such as silane functionalized polymer. HRR-100 can be used as adhesion promoter in various adhesive application for industrial usage such as automotive, woodworking, textile and so on. It shows excellent adhesion on various substrates such as PP, PC, ABS, PE and so on. It can be used for enhancing good properties and overcoming weakness of existing POR. POR is eco-friendly adhesive to replace PUR. (POR : polyolefin reactive, PUR : polyurethane reactive)

Molecular Chemical Systems™ PM-3300-157 is an aromatic urethane end-capped prepolymer containing monomeric MDI. Molecular Chemical Systems™ PM-3300-157 is designed for use in elastomer and binder systems where medium pro- cessing times are required.

Nylostab® S-EED® FF is a unique multifunctional additive specially tailored for high compatibility with nylons by molecular recognition.

OREVAC® CA100 is a maleic anhydride grafted polypropylene.

OREVAC® IM800 is a maleic anhydride grafted very low-density polyethylene.

OREVAC® OE808 is a maleic anhydride grafted very low-density polyethylene.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

Pale 4 polymerized castor oil oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents. Pale 4 polymerized castor oil is used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. It is a processing aid and plasticizer for rubber polymers.