Products

BONDERITE® L-GP 2412 is a concentrated graphite lubricant and coating material specially formulated for demanding high temperature applications up to 900°F (482°C). High heat resistance plus the very low residue left by the fluid component make BONDERITE® L-GP 2412 ACHESON (known as DAG 2412) ideal for such applications as gasket coatings, foundry maintenance operations, and brazing and welding stop-off coatings. Gaskets seal effectively and release easily when pretreated with BONDERITE L-GP 2412 ACHESON (known as DAG 2412).

BONDERITE® L-FG 137 is specifically formulated to provide a superior lubricating and release film for high temperature applications. Its unique particle size and binder system combine to promote a tenacious graphite film for maximum protection against galling, soldering and seizing.

BONDERITE® L-GP M 210 is a colloidal dispersion of molybdenum disulfide in alcohol. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) offers excellent extreme-pressure lubrication in a resin-bonded system that air dries in five to ten minutes. The material is easily applied by standard spray, brush, or dip methods to all substrates not affected by the fluid component. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) is supplied as a concentrate to be used as is or diluted in appropriate solvent for final application.

BONDERITE® L-GP M 214 MOS2 (known as ACHESON MOLYDAG 214) is both an industrial maintenance lubricant and automotive additive that contains very fine particles of molybdenum disulfide in mineral spirits. It forms tenacious films of molybdenum disulfide on metal surfaces for effective lubrication at temperatures up to 315°C (606°F). BONDERITE® L-GP M 214 MOS2 is particularly well suited for conveyor chain applications because of its ability to form solid lubricating films over the entire bearing surface. Metal-to-metal contact is reduced and bearing life is increased appreciably.

BONDERITE® L-GP 154, a specially processed colloidal graphite dry film lubricant, air dries rapidly at room temperature and adheres tenaciously to most substrates with minimum surface preparation. The thinness of the coating, coupled with high lubricity, provides clean, long wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush, or dip techniques. BONDERITE L-GP 154 ACHESON is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics. BONDERITE L-GP 154 ACHESON has been specified throughout the electronics industry in a multitude of roles. It can easily be blended with BONDERITE L-GP M 210 ACHESON (molybdenum disulfide insulating coating) to attain cost-effective sheet resistance variations.