BONDERITE® L-FG 137

Method of Use:

Dilution

BONDERITE L-FG 137 ACHESON (known as DAG 137) is a concentrate and should be diluted with distilled, demineralized or soft water prior to use. The concentrate should be agitated prior to mixing. When mixing, slowly add water to the concentrate. Be sure to mix well throughout the water addition. The dilution ratio will vary depending on method of application and end use. The ratios typically vary between 1:4 in extrusion applications to 1:25 in permanent mold and parting compound uses. Periodic agitation (mechanical) is recommended while using diluted product.

Application: To achieve optimum film formation, the metal substrates should be heated to at least 200°F (93°C). In most applications, the product should be spray applied. However, it can be swabbed, dipped, or brushed. The diluted material should be periodically agitated to ensure consistent results.

Specific advantages when using BONDERITE L-FG 137 ACHESON (known as DAG 137) are:

• Complete wetting of hot metal substrates
• Excellent coverage
• Superior adhesion and abrasion resistance
• Maximum release characteristics
• Finer surface finishes in casting applications

Use with adequate ventilation. Do not ingest. Wear protective gloves. Do not freeze. If frozen, the product will appear granular, settle and lose effectiveness. Keep container closed when not in use.