BONDERITE® L-GP 2412

Specific advantages offered by this product include:

• high lubricity
• protective coating
• Effective at high temperatures
• forms chemically inert film
• fluid component leaves very little residue
• requires minimum surface pretreatment
• supplied as a concentrate
• economical
• easy to apply

Method of Use:

Surface Preparation: Substrates should be clean. Loose dirt can be removed by wiping with a clean cloth. For maximum adhesion of the
coating, a solvent rinse or degreasing bath is recommended.

Dilution and Mixing:
BONDERITE® L-GP 2412 ACHESON (known as DAG 2412) is a concentrate and should be diluted for most applications.
Agitate the concentrate to a smooth, uniform consistency before and during dilution. BONDERITE® L-GP 2412 ACHESON (known as DAG 2412) may be diluted with mineral spirits, kerosene, Stoddard solvent, or other similar hydrocarbons. The dilution ratio will vary with the particular job requirements, but usually ranges from 1:3 to 1:10 (product: solvent).

Application:
Agitate the diluted BONDERITE® L-GP 2412 ACHESON (known as DAG 2412) to a uniform consistency just before application. The product can then be applied by spray, brush or dip, whichever method suits the job.

Combustible. Keep away from heat, sparks, or open flame. Use with adequate ventilation. Avoid breathing vapor. May cause eye irritation. Wash thoroughly after handling. Keep container tightly closed when not in use.