Products

H.B. Fuller® HM-1580 is a ready-to-use adhesive known for chemical resistance, oil and solvent resistance, good adhesion, medium open time, and excellent performance at both high and low temperatures.

WHT-6190A is polyester-based solvent based adhesive, supplied in form of white pellets with the characteristic of low viscosity, very fast crystallization rate, and good adhesion strength to PVC, PU, fabric and genuine leather.

RHOPLEX® N-619 is an acrylic emulsion which may be used neat or as an adhesive formulating base. It features both aggressive tack and high peel strength with outstanding adhesion to polyolefin film and metals.

RHOPLEX® N-1031-D is an acrylic emulsion which may be used neat or as an adhesive formulating base. This polymer product demonstrates very high shear (cohesive) strength and moderate tack and peel properties.

LOTADER® AX8840 is a random ethylene-glycidyl methacrylate copolymer. Glycidyl methacrylate provides reactivity (versus OH, COOH and NH2 groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8840 is compatible with LDPE in all proportions, and with almost all other ethylene copolymers. LOTADER® AX8840 exhibits good adhesion on PET, PBT, PPS, metal, paper, glass. Due to its reactivity induced by the glycidyl methacrylate, LOTADER® AX8840 can be used as a compatibiliser for polyesters/polyolefins blends and as an adhesive for some laminate structures (polyolefins/polyesters, polyolefins/PPS etc.).

Bluesil™ SLT 10B OFF WHITE is a product belonging to the chemical mixtures and blends family. It is primarily used in joints and sealing applications.

Polycin® 934 M-4 is a elastomeric polyurethane compound for use in fiber optic and copper cable filling applications. It has a low viscosity and extended pot life to form an effective water block, and excellent flexibility, electrical, and long-term stability properties. Polycin® 934 M-4 is especially applicable for environmental protection of electrical devices.

IPACOLL LP 7747TL is used in adhesives and sealants applications.

Bluesil™ SLT 3E TRANSLUCENT is used in adhesive and sealant applications, including glue and sealing adhesives. It is specifically designed for use in these end applications.

Bluesil™ SLT 10T is a one-component, odorless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. Bluesil™ SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures.