Products

ROVACE™ 9100AF Copolymer Emulsion is a new emulsion that offers the same performance as ROVACE 9100 Copolymer Emulsion, but is manufactured without the use of APEO surfactants. ROVACE 9100AF Copolymer Emulsion is a 55% solids vinyl/acrylic binder for interior flat and semigloss paints. This new generation of binder offers exceptional scrub resistance and stain removal and its consistent particle size minimizes variability in paint production. ROVACE 9100AF Copolymer Emulsion is compatible with today's prevalent use of rheologymodifiers that show very good application properties, flow and leveling characteristics. In our lab testing and evaluations we have not seen any differences in formulation parameters, application properties or dry film property differences between ROVACE 9100 and ROVACE 9100AF Copolymer Emulsion.

ROSHIELD™ 636 is a hard, styrene-acrylic polymer that offers one component, self-crosslinking technology for kitchen cabinets, for sealers and topcoats in molding formulations, and any interior board application. Coatings based on ROSHIELD 636 Emulsion exhibit outstanding mar, print, and block resistance without the limitation of pot life. The excellent color retention of ROSHIELD 636 Emulsion makes it an excellent choice for use over white and light colored basecoats. It offers very good ammonia resistance, is highly resistant to a wide range of stains and chemicals, and has unsurpassed humidity resistance.

CALCIUM STEARATE RSN VEG (5885) is in low to medium bulk density, relatively fine white powder.

CA/ZN-STEARATE 5050 is a low bulk density, fine white powder.

AA™ Standard Castor Oil is a commercial, quality refined grade castor oil. It is a light-colored viscous liquid. The principle constituent (approximately 90%) is the triglyceride (ester) of ricinoleic acid. The combination of hydroxyl group and unsaturation exists only in castor oil.

RHOPLEX® AC-261LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints.

RHOPLEX® AC-337N is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. RHOPLEX® AC-337N Acrylic Emulsion has been developed to react more efficiently with associative thickeners, leading potentially to lower formulation cost. RHOPLEX® AC-337N Acrylic Emulsion also shows improved color acceptance and alkyd compatibility. The 100% acrylic backbone ensures the high standard of tint retention, crack resistance, chalk resistance, and alkali resistance. The outstanding adhesion technology will ensure excellent adhesion to wood. RHOPLEX® AC-337N can clarity makes it possible to prepare transparent and semi-transparent stains with more attractive application properties than conventional alkyd emulsion or acrylic emulsion based stains.

RHOPLEX® HG-95P Emulsion Polymer was developed specifically for low VOC aqueous gloss enamels with excellent durability and resistance properties. It is recommended for interior/exterior applications in both high gloss and semigloss finishes. RHOPLEX® HG-95P Emulsion Polymer uses new ambient temperature crosslinking technology to offer improved performance versus conventional latex polymers. This new polymer technology was designed to provide VOC compliant enamels with excellent hardness development and durability for high traffic interior applications.

Bluesil™ RTV 3460 A is a silicone elastomer which cures at room temperature by a polyaddition reaction (10:1 ratio). It is designed as a high durometer rubber offering high mechanical strength and a long mold life.

Bluesil™ RTV 3460 B BLACK is a silicone elastomer which cures at room temperature by a polyaddition reaction (10:1 ratio). It is designed as a high durometer rubber offering high mechanical strength and a long mold life.