Products

AP 5948 modified cycloaliphatic amine hardener for epoxy resin based lacquers and coatings.

EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL® 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films ofEBECRYL® 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule. Over time, EBECRYL® 8701 may crystallize to a waxy solid form.

EBECRYL® 605 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) to provide a lower viscosity, easier handling product. EBECRYL 605 exhibits light color and fast cure response. Films of EBECRYL 605 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness and superior chemical resistance.

D.E.H.® 508 curing agent is a modified aliphatic amine designed for use with liquid epoxy resins cured at ambient or elevated temperature. It has low viscosity and results in fast set time, high strength and modulus. It also provides good heat and acid and alkali resistance.

EBECRYL® 4201 is an undiluted aliphatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance.

ALPEX® CK 450/PAST is a polyisoprene-based binder and crosslinking agent. It is used in coatings such as anti-corrosion and chemical-resistant paints, as well as in tank coatings. Additionally, it is suitable for use in letterpress, offset, and screen printing inks. This product offers excellent chemical resistance, improved gloss, and scratch resistance, while minimizing misting during application.

EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal.

D.E.R.® 325 liquid epoxy resin is a mono-functional reactive diluent modified reaction product of epichlorohydrin with Bisphenol-A.

D.E.N.® 438-A85 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in acetone.

RHOPLEX® HG-44P Acrylic Co-polymer Emulsion was developed specifically as a paint vehicle for both interior and light duty exterior high gloss and semigloss enamels. This aqueous latex allows the formulator to make enamel-like paints with the outstanding block resistance, stain removal, and washability needed for indoor use. RHOPLEX HG-44P also has good metal adhesion, resistance to household chemicals and can be formulated for light maintenance applications. With RHOPLEX® HG-44P, enamels can be easily formulated that represent a true alternative to oil-based paints. All of these benefits can be achieved without sacrificing the advantages inherent in high-quality waterborne acrylic paints.

D.E.H.® 581 curing agent is a low viscosity amine hardener for epoxy resins. It is a fast curing hardener and offers good low temperature cure. It results in a blush-free product and has good water spot resistance and excellent chemical resistance to acids and solvents. It can also be used as an accelerator for other hardeners in coatings and civil engineering.

Rilsan® D40 NATURAL are specialty PA powders obtained from renewable ressources. Rilsan® D40 NATURAL show outstanding performances such as anti-corrosion, chemical, impact, abrasion, graffiti resistance.

D.E.N.® 438-EK85 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl ethyl ketone.

AP 1054 LV is a low viscosity and highly reactive Phenalkamine hardener for epoxy resins based lacquers and coatings. It has excellent rapid cure properties, even at low temperatures offers very good chemical resistance, and provides excellent adhesion on wet, unprepared surfaces and concrete.

PETIA is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. PETIA is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. PETIA has a higher ratio of tri - to tetra-acrylate ester than the similar product EBECRYL 180, and therefore remains liquid at normal ambient temperatures.