Products

EBECRYL® 3603 is an epoxy novolac acrylate diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) . EBECRYL 3603 exhibits rapid cure upon exposure to ultraviolet light (UV) or electron beam (EB) and superior chemical and thermal resistance.

ONGRONAT® 3600 is a mixture of 4,4'-methylene diphenyl diisocyanate and 2,4-methylene diphenyl diisocyanate.

Experimental DLVNE-61 is a medium low viscosity Novolac resin modified with a Cycloaliphatic polyglycidyl ether (free of any organic solvent) that facilitate high solids coating formulations with low volatile organic compound (VOC) emissions, improved application, strong chemical and thermal resistance.

WANNATE® IT-170BS dissolved Aromatic 100 and n-butyl acetate (2:1), can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Based on its high hardness, it is normally mixed with WANNATE® HT series.

D.E.R.® 335 liquid epoxy resin is a low molecular weight, modified reaction product of bisphenol a/bisphenol f based liquid epoxy resin.

CYMEL® 1123 Resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes CYMEL® 1123 Resin particularly well suited for can coating applications. While CYMEL® 1123 Resin is insoluble in water, it shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. The poor light resistance properties of benzoguanamine makes CYMEL® 1123 Resin unsuitable for exterior applications.

RHOPLEX® HG-700 is an aqueous, 100% acrylic polymer designed for interior and exterior, VOC compliant, gloss and semigloss enamels. This binder uses ambient temperature self-crosslinking technology to offer improved enamel performance versus conventional latex polymers. The combination of an all-acrylic backbone and ambient cure crosslinking technology offers excellent performance in gloss and semi-gloss formulations at VOC levels under 150 g/L. Gloss enamels based on RHOPLEX® HG-700 offer durable coatings with excellent adhesion, block resistance, and stain removal. Suitable applications include factory applied topcoats for wood and wood composite materials such as joinery and siding products.

AP 5980L is a low viscosity modified cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. It exhibits high chemical resistance.

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. EBECRYL® 3701 imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.

EBECRYL® 1290 is a hexafunctional aliphatic urethane acrylate that exhibits very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 1290 demonstrate outstanding hardness, scratch and abrasion resistance, chemical resistance, and are resistant to yellowing.

AP 5000 is a low viscosity, reactive polyamide hardener solution in isopropyl alcohol for epoxy resins based lacquers and coatings.

EBECRYL® 8800-20R is an aliphatic urethane acrylate diluted with the reactive diluents tripropylene glycol diacrylate (TPGDA) (1) and ethoxyethoxyethyl acrylate (EOEOEA)(2). Films of EBECRYL® 8800-20R cured by ultraviolet light (UV) or electron beam (EB) exhibit toughness, flexibility, good exterior durability and resistance to yellowing.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

EBECRYL® 3700-25R is the bisphenol A epoxy diacrylate, EBECRYL® 3700, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3700-25R exhibits low odor and fast cure response. Films of EBECRYL® 3700-25R cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, high surface hardness, and the superior chemical resistance typical of an epoxy resin.

EBECRYL® 3701-20T is the modified bisphenol A epoxy diacrylate, EBECRYL 3701, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. Films of EBECRYL® 3701-20T cured by ultraviolet light (UV) or electron beam (EB) exhibit flexibility, abrasion resistance, high gloss, and superior chemical resistance.