Products

EVATANE® 28-05 is a random ethylene-vinyl acetate copolymer.

ACRYSOL™ DR-73 Rheology Modifier is a synthetic liquid thickener that provides a cost-effective, high-performance alternative to cellulosic thickeners in interior flat latex paints. ACRYSOL™ DR-73 offers application and feel properties similar to medium-grade cellulosic thickeners and hydrophobically modified HEC thickeners, while increasing high shear viscosity for enhanced film build, brush drag, and hiding power. It also delivers outstanding spatter resistance. ACRYSOL™ DR-73 is easy to handle and incorporate into paint formulations, and it is designed to resist microbial contamination.

CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximised when activation was performed at high temperatures.

ACRYSOL™ RM-995 offers both enhanced viscosity stability to colorant addition and improved sag resistance to broad-wall paints. ACRYSOL™ RM-995 is a solvent-free (Manufactured without added solvent), hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This KU-builder rheology modifier offers the properties that HEUR technology is known for, e.g., excellent flow, gloss development and applicability both interior and exterior, with improved performance in viscosity stability upon tinting and excellent sag resistance.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

EBECRYL® 3701-20T is the modified bisphenol A epoxy diacrylate, EBECRYL 3701, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. Films of EBECRYL® 3701-20T cured by ultraviolet light (UV) or electron beam (EB) exhibit flexibility, abrasion resistance, high gloss, and superior chemical resistance.

D.E.H.® 546 curing agent is a low viscosity modified cycloaliphatic amine intended for ambient temperature curing of liquid epoxy resins.

CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

ACRYSOL™ RM-825 Rheology Modifier is a nonionic urethane rheology modifier, designed for formulating interior/exterior paints ranging from highly structured to paints that portray nearly Newtonian behavior. ACRYSOL™ RM-825 Rheology Modifier rheology modifier shows a very good balance of flow and high shear viscosity. The nature of this balance is dependent on formulations and latex types. This allows the formulation of paints meeting a variety of rheological requirements. ACRYSOL™ RM-825 Rheology Modifier can be used as a co-thickener in many types of formulations for attaining a desired balance of low and high shear viscosities. It has excellent water and alkali resistance.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

RHOPLEX® EC-2848 is designed to provide elastomeric coatings with an excellent balance of elongation, tensile strength and dirt pickup resistance over a wide temperature range. The elongation properties of the polymer allow coatings to bridge dimensionally unstable cracks without rupturing. It also provides an excellent balance of toughness and elasticity at both low and high temperatures without sacrificing dirt pickup resistance. Coatings based on RHOPLEX® EC-2848 retain an attractive appearance as they age.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

TAMOL® 1254 is a versatile, low-cost, low-foaming polyacid dispersant that offers outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulations. In addition to good efficiency, this polyacid dispersant offers excellent stability and color acceptance even in formulations containing zinc oxide.

ROVACE™ 10 Vinyl Acrylic Emulsion is a durable, general-purpose vinyl acrylic emulsion designed for use in architectural coatings. It can be formulated over a wide range of pigment volume concentrations to provide cost effective, low odor, and improved environmental paint systems. It requires little or no coalescing solvents to form a continuous film at low temperatures. ROVACE 10 is made with no APEO -containing surfactants. In addition, ROVACE 10 offers excellent processing capabilities making it easy to pump and handle during the manufacturing process.

EVATANE® 28-150 is a random ethylene-vinyl acetate copolymer.