Products

EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL® 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films ofEBECRYL® 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule. Over time, EBECRYL® 8701 may crystallize to a waxy solid form.

EBECRYL® 53 is a purified grade of OTA 480, especially developed for formulating ultraviolet light (UV) and electron beam (EB) curable printing inks and overprint varnishes for food packaging applications. The purification process removes impurities that are potential sources for odor and extractables in cured products.

EBECRYL® 220 is a hexafunctional aromatic urethane acrylate that provides very fast cure response when exposed to ultraviolet light (UV) or an electron beam (EB). Cured films of EBECRYL® 220 exhibit excellent hardness and solvent resistance.

EBECRYL® 3720-TP25 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TP25 exhibits light color and fast cure response. Films of EBECRYL 3720-TP25 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin.

CYMEL® NF 3041 is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing CYMEL® NF 3041 exhibit superior catalyzed pot life relative to typical urea-based conversion varnishes and require significantly less catalyst to effect cure. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.

AP 1365 is an excellent light color and a low viscosity phenalkamine curing agent suitable for epoxy coating primarily for top coat application. The product has rapid cure and film properties at lower temperature and excellent adhesion on concrete, primers, and midcoats. This product is designed primarily for floor topcoat and self leveling applications.

EBECRYL® 629 is an acrylated epoxy novolac diluted with the reactive diluents trimethylolpropane triacrylate (TMPTA) and hydroxyethyl methacrylate (HEMA). When cured via ultraviolet light (UV) or electron beam (EB), EBECRYL® 629 exhibits high surface hardness, good heat resistance, low shrinkage, and good adhesion to metal, particularly copper. This resin was specifically designed for UV cure solder resist applications.

HIRENOL® PL-2000S has low viscosity, low volatile extender for epoxy, polyurethane and acrylic. Act as a plasticizer, pot-life controller, diluent, modifier, good color and excellent uv-resistance. Wide process window, non-toxic, good compatibility, storage stability. Excellent performance in adhesion, hardness, water resistance, gloss, toughness, exduation, shrinkage, self-leveling, trowelability,

EBECRYL® 3730-TP20 is the modified diacrylate ester of a bisphenol A based epoxy resin diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA). It is designed primarily for use in ultraviolet light (UV) or electron beam (EB) curable formulations. EBECRYL® 3730-TP20 is light in color with high UV/EB reactivity, and exhibits good wetting of pigments, matting agents and substrates compared to unmodified epoxy acrylates. Cured films based on EBECRYL® 3730-TP20 will typically demonstrate high gloss and hardness, and good chemical resistance.

EBECRYL® TMPTMA is a trifunctional methacrylate monomer that will readily copolymerize with other unsaturated compounds using radical curing mechanisms. Polymerization can be accomplished thermally using peroxide or azo type radical initiators, with ultraviolet (UV) or visible light using radical photoinitiators, or with high energy electrons (EB). EBECRYL® TMPTMA is typically copolymerized with other unsaturated compounds such as vinyl, methacrylate and acrylate functional materials to increase crosslinking and improve cured polymer properties such as hardness, chemical resistance and thermal resistance.

Caspol™ 5006 is a 100% solids castor oil based reactive diluent with a blend of primary and secondary hydroxyls to yield a balanced reactivity. This polyol has a functionality of 3.5 and its structure leads to high hardness and strength, with good elongation and flexibility. Caspol™ 5006 is a castor oil polyol which will impart improved coating properties such as good weatherability, flow and application properties.

Pentalyn® FC is used in coatings for paper coating and water-reducible paints, in industrial additives for wax emulsions, and in ink & toner applications for flexography ink and waterborne ink. It features acid functionality, excellent adhesion, block resistance, solubility, fast solvent release, good hardness, thermoplastic properties, high gloss, and a high softening point. It functions as an adhesion promoter, binder & resin, coupling agent, and gloss enhancer in CASE ingredients, and as a resin in industrial additives.

EBECRYL® 830 is a polyester hexa-acrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 830 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.

VANCRYL® 68 is a solid acrylic resin that provides outstanding pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL 68 are excellent. In coatings, VANCRYL® 68 provides high gloss, scuff resistance, and hardness. VANCRYL 68 is compatible with most acrylic vehicles and other vehicles such as maleic resins. VANCRYL® 68 is effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.

EBECRYL® 810 is a polyester tetraacrylate that exhibits low viscosity and good cure response. Films of EBECRYL 810 cured by ultraviolet light (UV) or electron beam (EB) demonstrate surface hardness, chemical resistance and generally good adhesion. EBECRYL® 810 is particularly suited to application methods requiring low viscosity such as solventless spray and vacuum coating.