Products

AVANSE™ ST-410 is a new high-performance, 100% acrylic, waterborne polymer can be formulated to meet the toughest VOC standards and still outperform traditional solvent and waterborne semitransparent stain technologies. Semitransparent stains based on AVANSE™ ST-410 Acrylic Emulsion do not require coalescent or heavy metal driers, they are easy to apply, and they enhance the appearance of new and weathered wood with a long-lasting finish. In addition, the combination of morphology and unique particle stabilization maximizes the flow and lapping characteristics during application, while building early resistance properties upon drying.

DYNOL™ 800 has the ability to reduce both static and dynamic surface tension in waterborne coatings and inks. DYNOL™ 800 is an excellent choice for difficult-to-wet substrates requiring good flow and leveling.

SURFYNOL® 485 is a substrate wetting agent for waterborne coatings and inks with high solubility in aqueous systems. SURFYNOL® 485 can also be used for its stabilization and emulsification properties.

Dynasylan® 1175 is a cationic polymeric aminofunctional silane possessing hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® 1175 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter and as a surface modifier. Dynasylan® 1175 is a dark yellow to brown liquid. Dynasylan® 1175 contains 40% active ingredient and about 60% of methanol. Dynasylan® 1175 is miscible with water, with hydrolysis occurring.

SURFYNOL® MD-20 is a very compatible molecular defoamer based on Gemini surfactant technology. Freeof siliconeand silica. Offers additional dynamic wetting properties.

TEGO® DISPers 653 is a waterborne wetting and dispersing additive specifically for the production of universal colorants for decorative coatings. Wets and stabilizes inorganic and organic pigments. Can be used for a whole colorant line. Anionic and solvent-free.

VANCRYL® 960 is a very low glass transition temperature acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 960 is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used dispersion resins. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. VANCRYL® 960 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45.

Licocene® PP MA 7452 granules are used in hot melt adhesives. They feature good wetting, improved cohesion, and enhanced adhesion, along with good mechanical properties and reduced moisture uptake. It functions as an adhesion promoter, coupling agent, and wetting agent in both CASE ingredients and plastics & elastomers.

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

SURFYNOL® DF-110 L is a very compatible molecular defoamer based on Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties.

Dynasylan® HS2926 is a surface modifier, coupling agent, and crosslinking agent compatible with elastomers, rubbers, glass, metal, mineral substrates, thermoplastics, and thermosetting plastics. It functions as a coupling agent, crosslinking agent, and surface modifier in industrial additives.

SURFYNOL® AD-01 is multi-functional gemini surfactant combining dynamic wetting and molecular defoaming. SURFYNOL® AD-01 also acts as a coalescing aid.

TEGO® Rad 2250 (Germany) is a broadly usable radically cross-linkable slip agent for clear coats. It provides efficient wetting, slip, and flow combined with very good compatibility.

SURFYNOL® SE-F is a self-emulsified surfactant that combines excellent wetting properties with good foam control and ease of incorporation in water borne coatings and inks.

DYNOL™ 607 provides extremely low dynamic and static surface tension with low to moderate foam. It is suitable for waterborne coatings and inks. DYNOL™ 607 improves solubility in a variety of demanding waterborne applications.