Products

AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxidein the ratio of 5:1.

ACRYSOL™ RM-6000 Rheology Modifier is a nonionic urethane rheology modifier based on solvent-free1 technology offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. ACRYSOL™ RM-6000 Rheology Modifier has demonstrated utility in a broad range of emulsions, including the “newer generation”, low-VOC types such as RHOPLEX™ SG-30 Acrylic Emulsion and RHOPLEX™ ML-300 Acrylic Emulsion.

TEGO® ViscoPlus 3030 is a pH-independent, associative thickener with pseudoplastic flow behavior.

LIPOTIN® DB is a wetting and dispersing additive for solventborne formulations. It provides good wetting of pigments and introduces a pseudoplastic flow behavior.

AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane).

ACRYSOL™ TT-615 is an alkali swellable acrylic polymer emulsion used as either a primary or ancillary thickener in coatings. This product exhibits viscosity build comparable to high molecular weight HEC thickeners at low shear levels. Viscosity is developed by neutralization to a pH of 7 to 10. ACRYSOL™ TT-615 demonstrates greater roller spatter resistance than the cellulostics, but with a more pseudoplastic rheology profile. The liquid physical form of ACRYSOL™ TT-615 facilitates its incorporation into grinds and letdowns.

ACRYSOL™ RM-12W is a solvent-free, nonionic rheology modifier designed to offer high low-shear viscosity with an extremely shear thinning rheology and excellent thickening efficiency. Unlike conventional thickeners, ACRYSOL™ RM-12W offers excellent sag resistance with minimal effect on flow and leveling. While not capable of providing true thixotropy, it can offer advantages typical of thixotropes. These properties include improved brush/roller loading, good anti-drip properties, good in-can structure, and excellent flow, sag balance.

ACRYSOL™ RM-8W Rheology Modifier is a solvent-free, nonionic, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that offers excellent flow and leveling, uniform film formation, gloss development and high thickening efficiency in interior and exterior latex paints. It can be used in combination with a high-shear builder such as ACRYSOL RM-3000 Rheology Modifier to reach a desired balance of high and low shear viscosity in flat through gloss formulations.

AEROSIL® R 106 Coating is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane).

TEGO® ViscoPlus 3060 is a pH-independent, associative thickener with strongly pseudoplastic flow behavior.

ACRYSOL™ RM-995 offers both enhanced viscosity stability to colorant addition and improved sag resistance to broad-wall paints. ACRYSOL™ RM-995 is a solvent-free (Manufactured without added solvent), hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This KU-builder rheology modifier offers the properties that HEUR technology is known for, e.g., excellent flow, gloss development and applicability both interior and exterior, with improved performance in viscosity stability upon tinting and excellent sag resistance.

ACRYSOL™ RM-725 Rheology Modifier is a solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) based on proprietary technology for an excellent balance of properties. ACRYSOL™ RM-725 Rheology Modifier is designed as a universal, efficient mid shear viscosity builder with all binder types that are used for interior wall paints as well as exterior systems for wood, trim stains and masonry. This KU-building associative thickener offers formulators an excellent balance of sag resistance and leveling, including PVA and VAE binder based paints. ACRYSOL™ RM-725 Rheology Modifier also contributes significant to high shear viscosity, allowing the reduction of ICI builder use level in the paint.

ACRYSOL™ TT-935 Rheology Modifier is an alkali-soluble, anionic associative thickener, designed to give medium-shear-rate viscosity in interior/exterior flat latex paints. ACRYSOL™ TT-935 Rheology Modifier can be used as either a primary or co-thickener in water-based coatings. It offers excellent resistance to roller spattering with better film build and leveling than conventional thickeners. Paints formulated with ACRYSOL™ TT-935 Rheology Modifier as a sole thickener exhibit improved flow and leveling compared with medium- to high-molecular-weight cellulosic thickeners. The rheology can be modified to further improve flow and leveling by addition of low levels of surfactant or glycol-ether-type co-solvents to reduce the low-shear viscosity. Addition of some pre-dispersed colorant may also have this effect. ACRYSOL™ TT-935 Rheology Modifier is recommended for interior paints requiring improved flow and leveling and lower raw material cost compared to cellulosic thickeners. Where superior water resistance is required, we recommend ACRYSOL™ SCT-275 Rheology Modifier. ACRYSOL™ TT-935 can be used in exterior paints, but formulators should exercise caution to minimize potential blistering due to the anionic nature of this product. Delivered as a low-viscosity liquid, it is very easy to handle and incorporate into paint. It is resistant to microbiological degradation, thereby avoiding viscosity loss in paint, a common problem for manufacturers.

ACRYSOL™ SCT-275 Rheology Modifier is an efficient nonionic polyethylene oxide(HEUR) associative rheology modifier which can impart excellent rheological properties including flow and leveling, uniform film formation and film build, to latex based coatings. ACRYSOL™ SCT-275 Rheology Modifier is recommended for use in flat to semigloss paints and primers for both exterior paints and premium interior paints.It is especially suited to replace or be blended with conventional cellulosic thickeners where improved flow and leveling, increased hiding, and spatter resistance is desired. ACRYSOL™ SCT-275 Rheology Modifier is particularly suited for low solids, vinyl acrylic formulations where it yields excellent flow/sag balance, color acceptance, and syneresis resistance. ACRYSOL™ SCT-275 Rheology Modifier is supplied as a low viscosity liquid that is easy to handle and incorporate in the paint making process.

COPRO® CP-590 is an anionically stabilized, highly carboxylated styrene butadiene based latex thickener.