Products

UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. UCECOAT® 2801 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. UCECOAT® 2801 contains no co-solvent. UCECOAT® 2801 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2801 provides hardness in the polymerized coating along with good stain and chemical resistance.

TEGO® VariPlus DS 50 strongly improves the mechanical properties of waterborne inks and coatings. It also improves resistance against water, solvents, and chemicals. It leads to excellent adhesion on plastics and improves intercoat adhesion.

PARALOID™ B-60 100% Resin permits the manufacture of hard, heat-resistant coatings that exhibit fast tack-free time, rapid hardness development, and very good dry and wet adhesion to Plexiglas acrylic, ABS, and polystyrene plastics. It is recommended for use in lacquers for automotive plastics and in clear finishes for furniture plastics.

RHOBARR™ 325 is an aqueous acid-modified dispersion intended for paper barrier coating applications. RHOBARR™ 325 Barrier DISPersion has been designed for use in formulations targeted for paper barrier coating applications. This base dispersion can be formulated with rheology modifiers, waxes and other components as required, forming a resistant coating on proper thermal curing.

HIKOREZ® H-2200 is light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins and aromatic olefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA). And this grade also can be used as tackifier for hot melt adhesive (HMA), because of its good compatibility with base polymer such as EVA, SBS (Styrene Butadiene Styrene), SIS (Styrene Isoprene Styrene).

D.E.R.® 8230W5 is used in powder coating applications and functions as a binder and resin in CASE ingredients.

PARALOID™ B-44S 40% Resin is specified for PVDF coil coatings and can be blended with other PARALOIDTM resins to adjust the balance of properties required for a particular application, such as color/base coats for metal substrates. It is supplied as a 40% solution in toluene and is also available in a solid grade (PARALOIDTM B-44 Solid Grade Thermoplastic Acrylic Resin).

CYMEL® U-646 is a urea formaldehyde (UF) resin, specifically urea polymerized with formaldehyde and isobutylated.

OREVAC® 18725N is a polypropylene based adhesive resin for extrusion and thermo- lamination processes. Available in pellet form, it can be processed on most polyolefin extrusion or coextrusion equipments.

HP0145 - Water-Reducible Alkyd is a water-reducible short oil chain stopped alkyd dissolved in Glycol Ether EB and 2-Butanol (50/50). Based on Tall Oil Fatty Acids, this product may be reduced with water after appropriate neutralization with materials such as ammonia, triethylamine or DMEA. Baking enamel formulations can also be produced by adding appropriate amino resins.

DERMULSENE® DP 1601 is an aqueous, solvent free resin based on stabilized rosin ester.

EBECRYL® 4101 is an undiluted aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film.

ELVACE® 750 is a non-APEO surfactant stabilized vinyl acetate-ethylene copolymer emulsion.

PLYAMUL® CPS-104 is an externally plasticized, hydroxyethyl cellulose stabilized, vinyl acetate homopolymer

PLATAMID® HX 2544 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This very low melt viscosity grade is particularly suitable for manufacturing webs, nets, mono and multi filaments, and films by extrusion.