Products

K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate. The composition of this blend of classic dibenzoates is optimized for waterborne latex applications.

K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that was created to lower the VOC content of a coating more than other K-FLEX® 500P plasticizers. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical.

Focus ChloroPar W-40 is a chlorinated compound based on C21-34 alkanes. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Focus ChloroPar W-40AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Focus ChloroPar P-53 is a chlorinated paraffin based on a medium-chain (C14-16) paraffin. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Focus ChloroPar P-45 is a chlorinated paraffin based on a medium-chain (C14-16) paraffin. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Citroflex™ A-4 is a low molecular weight citric acid ester partially derived from bio-based raw materials.

40 Oil - Polymerized Castor Oil at the double bond yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks, and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil, and solvent resistance.

Dibutyl Sebacate is a specialty plasticizer that provides excellent compatibility and superior low temperature properties to a variety of polymers. The low temperature advantages of DBS make this material an ideal choice for vinyl food contact films used in refrigeration.

K-FLEX® 975P is a blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. K-FLEX® 975P was created to offer a broad range of compatibility with polar polymers

HP7031-Coconut Alkyd is a short oil alkyd resin dissolved in xylene that uses coconut oil to produce a resin with initial low colour and little or no yellowing on aging.

Bluesil™ FLD 47 V100 is straight chained polydimethylsiloxanic fluids.

GRANOLITE® TEG is a triethylene glycol- esterified rosin resin with low viscosity and very low VOC content. Thanks to its low viscosity, it flows easily and is ideal for use as a tackifier and plasticizing agent in various adhesive formulations, particularly for construction.