Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Country of Origin
- Product Code
- MITM12111
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Adhesive & Sealant End Applications
- Coating End Applications
- Compatible Polymers & Resins
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
K-FLEX® 975P has been found to perform well in the following applications:
- Plastisols
- Melt compound flexible vinyl applications
- Architectural latex coatings as a low VOC coalescent/plasticizer
- Other coatings, including graphic arts applications, waterborne overprint varnish and waterborne flexographic ink
- Latex adhesives
Due to its lower freeze point, K-FLEX® 975P also has better handling properties than other modern binary dibenzoate blends. For this new product additional applications are being considered such as in latex caulks and sealants. Another benefit provided by K-FLEX® 975P is that it is considered a low vapor pressure-volatile organic compound (LVP-VOC) by Rule 310 of CARB, meaning that K-FLEX® 975P is not considered a VOC in California for applications such as latex caulk.
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Other
- Color (SDS)
- Colorless to light yellow
- Explosive Nature (SDS)
- Not explosive
- Flammability (SDS)
- Non falmmable
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Ester like
- Other Hazards
- None known
- Oxidizing Properties (SDS)
- Non oxidising
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Assay min. 98.0 % % as benzoate ester Total Acidity max. 0.3 % % Benzoic Acid - Material Composition
Value Units Test Method / Conditions Volatile Organic Compounds (VOC) 3.2 % % ASTM D2369 - Optical Properties
Value Units Test Method / Conditions Color Scale max. 150.0 APHA APHA Refractive Index 1.5238 - at 25°C - Physical Properties
Value Units Test Method / Conditions Boiling Point 215.0 °C °C Boiling Point min. 350.0 °C °C at 750mmHg Density 9.6 lb/gal lb/gal ASTM D1475 at 25°C Flash Point 204.0 °C °C ASTM D92 Freeze Point 4.0 °C °C Glass Transition Temperature (Tg) -54.0 °C °C Differential Scanning Calorimetry Kinematic Viscosity 89.0 cSt cSt at 25°C Moisture Content 0.02 % % Solubility in Water 0.006 % % in water Specific Gravity 1.15 - at 25/25°C Surface Tension 44.8 dyn/cm dyn/cm ASTM D1331 Viscosity 99.0 cPs cPs Brookfield Viscometer at 25°C, 20 Rpm - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 350.0 °C °C At 1013 Hpa Density (SDS) 1.15 g/cm³ g/cm³ at 68°F Flash Point (SDS) 202.0 °C °C ASTM D92 Kinematic Viscosity (SDS) 63.0 mm²/s mm²/s At 77°F Melting Point (SDS) 4.0 °C °C Relative Density (SDS) 1.15 - Surface Tension (SDS) 44.8 mN/m mN/m at 77°F Vapor Pressure (SDS) 0.0000048 hPa hPa at 77°F, extrapolated - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 730.0 d d