Products

CYCAT® 4040 is a catalyst that improves cure time in CASE ingredients. It functions as a catalyst in various applications.

LOTADER® 8200 is a random ethylene-ethyl acrylate-maleic anhydride terpolymer. Due to its properties, reactivity, fluidity and compatibility with tackifying resins and waxes, It is suitable as additive for hot melt adhesive formulations and as coupling agent in mineral filled compounds.

MARLOX® RT 64 is one of the many low foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 64 is a turbid liquid at room temperature and essentially 100% active.

Stabaxol® I is an active antihydrolysis agent for polyester polyurethanes produced by hot casting as well as for adhesives based on polyester polyurethane.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

RHOPLEX® HG-98C is an acrylic emulsion polymer designed specifically for low solvent content, aqueous gloss enamels with excellent appearance and resistance properties. RHOPLEX® HG-98C uses ambient temperature crosslinking technology to offer improved performance versus conventional polymers. It has excellent hardness development and durability for high traffic interior applications.

RHOPLEX® WL-51 is ideal for high-performance waterborne finishes for coating plastic substrates, such as those used for business machines and office equipment. RHOPLEX® WL-51 is recommended for use on the following plastics: acrylonitrile/butadiene/styrene, polycarbonate, polyphenylene oxide, polyvinyl chloride, acrylic, polystyrene, high-impact polystyrene, polypropylene, and pre-treated thermoplastic polyolefin. RHOPLEX® WL-51 delivers an outstanding combination of application, durability, and appearance benefits that make it an excellent choice for demanding business and office applications.

PARALOID™ AU-608S Resin are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

RHOBARR™ 214 is a binder and resin used in paper and paperboard coating applications. It provides blocking resistance, excellent stability, fat and grease resistance, good barrier properties, heat sealability, low coefficient of friction, and resistance to mineral oil, oil, plasticizers, and water.

PARALOID™ B-44S 40% Resin is specified for PVDF coil coatings and can be blended with other PARALOIDTM resins to adjust the balance of properties required for a particular application, such as color/base coats for metal substrates. It is supplied as a 40% solution in toluene and is also available in a solid grade (PARALOIDTM B-44 Solid Grade Thermoplastic Acrylic Resin).

PARALOID™ A-21 30% Resin is a very hard methyl methacrylate type polymer with enhanced adhesion properties. It is provided as a 30% solution in a toluene/butanol system. The polymer is also available in a solid grade form. Lacquers formulated with PARALOID™ A-21 30% Resin possess excellent intercoat adhesion, hardness, and outdoor durability. PARALOID™ A-21 30% Resin will air-dry rapidly to give clear, colorless films that have excellent resistance to yellowing.

Rilsan® 7413 BLUE MAC ES is applied by spray and is compatible with metal substrates and surfaces.

PEBAX® 7233 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 7233 SA 01 is suitable for food contact applications.

PEBAX® MX 1205 SA 01 MED is a polyamide used in printing and packaging applications.

PEBAX® 5533 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 5533 SA 01 is specially designed to food uses.