Products

EBECRYL® 242N is a tin-free aliphatic urethane acrylate diluted in isobornyl acrylate (IBOA).

CEAMFIBRE 7000 is a dietary fiber ingredient produced from high quality citrus peel.

Hatcol® 1140 is a synthetic polyol ester of pentaerythritol and mixed short chain fatty acids. The ester structure is ptimized to provide excellent high temperature and hydrolytic stability while maintaining good low temperatur properties.

TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints.

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

TEGO® Powder Aid D01 is a solid multi functional polymeric additive for powder coatings. It provides pigment wetting, reduced melt viscosity, improved gloss, and leveling.

ALFONIC 1216CO-7 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. ALFONIC 1216CO-7 Ethoxylate is liquid at room temperature, essentially 100% active, and has the following structural formula: CH₃(CH₂)ₓ(OCH₂CH₂)₃OH, where ‘x’ varies between 11 and 15. The narrow-range version of this ethoxylate made using Sasol Chemicals patented NOVEL catalyst technology is also available.

CARBOWET® 109 is a non-ionic wetting additive that provides additional dispersing properties. Wets all kinds of pigments. Was designed as alternative to APEs with a HLB-value around 13.

Lobase® C-4502 is a 20 TBN oil soluble neutral calcium sulfonate. It is a general purpose neutral calcium sulfonate typically used as a detergent and rust inhibitor in crankcase lubricants. It is compatible with most mineral base oils, white oils, and synthetic base stocks.

EBECRYL® 1710 is an acrylic polymer diluted 60% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). EBECRYL® 1710 is used as the primary or a modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to improve film properties such as adhesion and lay-down.