Products

Baerolub® FTA Veg Prill is a relatively high bulk density, free flowing prills.

3M™ Glass Bubbles HGS19K46 provide a low-density solution ideal for drilling and cementing across highly depleted zones and weaker formations. They help prevent issues such as fluid loss, lost circulation, differential sticking, and formation damage by minimizing excessive overbalance conditions. This results in improved penetration rates and enhanced well productivity in challenging environments.

Polycin® T-400 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® T-400 will impart higher hardness and strength, and as a reactive diluent, Polycin® T-400 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

IOX B 02 is an iron oxide pigment used in dyestuffs and industrial additives, classified as a mixture and blend.

SILIKOPHEN® P 50/X non reactive methyl phenyl silicone resin

Dynasylan® F 8263 acts as a surface modifier on oxidic, carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). Dynasylan® F 8263 is a colorless liquid. It can be diluted in alcohols and various other organic solvents, e.g. n-hexane, xylol, acetone or ethyl acetate.

ALUMINIUM ALLOY POWDER SCALMA40B5 is an odourless light grey material which is available in a range of sizes up to 1mm. Above this, the product is usually referred to as granulate. It is produced commercially by atomizing molten aluminium using air or inert gas. Our products are available in a range of sizes, the first grade commercially available has a median size of 1 micron. And all aluminiuim powder is made from minimum 99.85% purity aluminium ingot.

RHOPLEX® WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) of RHOPLEX® WL-100 accommodates a broad range of formulation types and formulation process techniques, providing the formulator with a versatile binder for a variety of applications. Robustness, along with 50% weight solids, allows the formulator to achieve volume solids above conventional waterborne binders.

Bluesil™ FLD 48 V20 000 is polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl end groups.

EBECRYL® 8414 is a urethane acrylate developed for liquid energy curable thermoforming inks. Flexographic inks made with EBECRYL® 8414 exhibit excellent thermoformability with draws up to 1" without cracking, blistering, separation or loss of adhesion. This medium viscosity oligomer has good pigment wetting capability and ink performance.

Basic Zinc Chromate 233 is primarily used in two component acid wash primers used to protect steel, galvanized surfaces and aluminum where provides improved adhesion to the topcoat as well. Since it provides protection on various substrates as well. Typical use levels 3-7

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.

NANOPOX® C 620 shows the highest performance in scratch-and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating

SURFONIC® L24-12 is the 12-mole ethoxylate of linear, primary 12-14 carbon number alcohol. It is a water-soluble, nonionic surface active agent which is compatible with other nonionic surfactants and with most anionic and cationic surfactants. The product is a white waxy solid at room temperature.

ZINC STEARATE SW is used in coated paper and paperboard, industrial cleaning, and surface care markets. It is applicable in rubber compounding processes. It functions as a lubricant, release agent, and water repellent in cleaning ingredients, industrial additives, and plastics and elastomers.