Products

ACRYSOL™ RM-12W is a solvent-free, nonionic rheology modifier designed to offer high low-shear viscosity with an extremely shear thinning rheology and excellent thickening efficiency. Unlike conventional thickeners, ACRYSOL™ RM-12W offers excellent sag resistance with minimal effect on flow and leveling. While not capable of providing true thixotropy, it can offer advantages typical of thixotropes. These properties include improved brush/roller loading, good anti-drip properties, good in-can structure, and excellent flow, sag balance.

CALCIUM STEARATE GL 34 5485 is a low to medium bulk density, fine white powder.

Agimid® 210B000 is a PA 12 rigid with high fluidity dedicated to the injection molding. The main application is cable ties for the electric and electronics market.

ACRYSOL™ RM-244 is a solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary Acid Suppression technology for an excellent balance of properties. This KU-building associative thickener offers formulators an excellent balance of sag resistance in tinted paints, flow and leveling, and gloss development for interior and exterior paints. ACRYSOL™ RM-244 also contributes ICI viscosity allowing the reduction of ICI builder concentration in most formulations.

EBECRYL® 3200 is a blend of acrylated aliphatic and aromatic bisphenol A epoxy resins and exhibits relatively low viscosity and good wetting ability. Films of EBECRYL 3200 cured by ultraviolet light (UV) or electron beam (EB) possess high gloss, flexibility and chemical resistance.

Agimid® 240 N000 is a heat and light stabilized product for extrusion. The main application is colored pneumatic tubes for industrial and automotive markets.

EBECRYL® 225 is a ten functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 225 exhibit outstanding surface hardness and low haze development after abrasion. In addition, EBECRYL® 225 does not contain intentionally added organic tin compounds, heavy metals* or quinones.

CALCIUM STEARATE LA GRANULAR HYDENSE® is a high bulk density, free flowing granular powder.

ACRYSOL™ G-111 is an ammonia neutralized poly-acrylate solution polymer recommended for thickening and stabilizing water based synthetic and natural latexes. It produces thickened latexes of a smooth and consistent texture and is insensitive to sodium, calcium, and magnesium ions.

RHOPLEX® EC-3814 is designed to provide elastomeric coatings with an excellent balance of elongation, tensile strength and dirt pickup resistance over a wide temperature range. RHOPLEX® EC-3814 retains this balance of properties over formulation ranges not previously attainable for elastomeric wall coatings. RHOPLEX® EC-3814 can also be formulated at a higher PVC than Dow’s other elastomeric binders, which can lead to formulated cost savings, while still maintaining excellent mechanical properties. Furthermore, it shows a dramatic improvement in alkali resistance over hot masonry substrates compared to other elastomeric binders.

ACRYSOL™ WS-68 Emulsion is a thermosetting acrylic polymer supplied as a colloidal dispersion in water. When formulated with monomeric melamine resins, it facilitates the formulation of industrial baking enamels that offer excellent spray characteristics and film properties.

RHOPLEX® AC-264 is a unique high solids, 100% acrylic emulsion vehicle for exterior latex paints which provides a high level of adhesion to chalky substrates. RHOPLEX® AC-264 represents a slight modification of RHOPLEX® AC-64 is recommended as a substitute for the latter product. As when making any raw material change, the formulator should check key properties such as color acceptance and adhesion.

RHOPLEX® AC-337N is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. RHOPLEX® AC-337N Acrylic Emulsion has been developed to react more efficiently with associative thickeners, leading potentially to lower formulation cost. RHOPLEX® AC-337N Acrylic Emulsion also shows improved color acceptance and alkyd compatibility. The 100% acrylic backbone ensures the high standard of tint retention, crack resistance, chalk resistance, and alkali resistance. The outstanding adhesion technology will ensure excellent adhesion to wood. RHOPLEX® AC-337N can clarity makes it possible to prepare transparent and semi-transparent stains with more attractive application properties than conventional alkyd emulsion or acrylic emulsion based stains.

Agimid® 141 B120-S is a plasticized, heat and light stabilized product with processing aid for extrusion. The main application is pneumatic tubes thanks to combination of cold impact, burst pressure and high aging resistances.

EBECRYL® 860 is an epoxidized soya oil acrylate especially suited to improving the flow and leveling of ultraviolet light (UV) or electron beam (EB) curable inks and coatings. Pigment wetting and adhesion are often enhanced when EBECRYL® 860 is used as a modifier in inks and clear or pigmented coatings on paper and metal.