Products

EBECRYL® P104 is an acrylated amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL P104 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on total formulation, usually combined with 3-5% photosensitizer. EBECRYL P104 can be used with EBECRYL P39 (a polymeric benzophenone derivative) for formulations requiring low residual odor.

D.E.R.® 668-20 Solid Epoxy Resin is a high molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 668-20 Solid Epoxy Resin is designed primarily for use in one pack stoving enamels in combination with heat-reactive cross-linking agents such as amino- and phenol- formaldehyde resins. D.E.R.® 668-20 Solid Epoxy Resin may also be used as binder in ambient curing systems in combination with isocyanate cross-linkers. Finishes made from D.E.R.® 668-20 Resin are suitable for metal decoration, interior and exterior can coatings, tube and drum linings, coil primers and many other industrial applications.

VALIO EILA™ PRO LACTOSE FREE SKIMMED MILK POWDER is produced by spray drying pasteurised skimmed cow's milk of Finnish origin, from which lactose is partially removed by filtration and the remaining lactose is enzymatically hydrolysed to glucose and galactose. The product can be widely used in the food industry just like standard skimmed milk powder, provided that the higher protein content and caramelising tendency are taken into account.

Esterex™ P61 is a API category Group V fluids. Esterex™ P61 has excellent low temperature properties, good lubricating properties, and low volatilities. Esterex™ P61 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ P61 is ideal for use in air compressor applications, where low viscosity indices are acceptable and low cost, clean operation is desirable.

Protectosil® VPS WS 602 is an aqueous emulsion for the water repellent treatment of mineral porous materials. Essentially VOC free.

Hatcol® 2965 is a pure polyol ester base stock based on pentaerythritol which combines excellent high temperature stability with a very low pour point.

ORGASOL® 2002 ES 5 NAT 3 is used as a surface modifier in case ingredients and composite materials.

Dynasylan® 9116 is a monomeric long-chain alkylfunctional silane. Dynasylan® 9116 is a clear colorless liquid and soluble in common non-polar organic solvents (e.g. petroleum ether,toluene). However its low volatility and viscosity make Dynasylan® 9116 an easy-to-handle additive. During the hydrolysis reaction between water and Dynasylan® 9116 a certain amount of methanol (VOC) is released.

Clearstrength® E922 is a methacrylate-butadiene-styrene (MBS) core shell impact modifier designed to impart excellent ambient and low temperature toughness to engineering polymers. Clearstrength® E922 impact modifier is aimed to formulate polycarbonate, polyesters and a variety of polycarbonate blends, particularly PC/ABS, for maximum impact.

TEGO® Foamex 825 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.

Licomont® BS 100 granules is a mixture of fatty acid derivatives for bitumen modification.

CEAMPECTIN LMA 6310 is a low ester amidated pectin with medium reactivity with calcium extracted from selected high quality citrus peel and standardized to obtain an uniform performance.