Products

Bluesil™ FLD 621 V10 000 is a α/ ω vinyl dimethylpolysiloxanes. They are available in viscosities from 20 mm²/s to 170 000 mm²/s. They are mainly used as base polymers for the production of silicone elastomers produced by a polyaddition crosslinking reaction, and as additives to modify organic polymer compounds.

TEGO® DISPers 678 is a polymeric wetting and dispersing additive for solventborne formulations. Providesoutstanding long-term stability especially for formulations with mixed pigmentation.Stabilizes all kindsof pigments and reduces floatation.Excellent viscosity reduction makes it very suitable for 2- pack high solids formulations.

SURFYNOL® DF-110 L is a very compatible molecular defoamer based on Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties.

TEGO® DISPers 750 W is a slightly anionic,polymeric wetting and dispersing additive for high-quality water borne formulations. Very compatible.Suitable for all kinds of pigments. With inorganic pigments,outstanding stabilization performance

TEGO® DISPers 1010 is a polymeric wetting and dispersing additive used todispersepigments in solventsof low polarity, like whitespirits. Especiallyin low polar solvents, itsoutstanding viscosityreduction can beobserved.

TEGO® DISPers 761 W is a non-ionic wetting and dispersing additive with focuson pigment wetting. Showsoutstanding color strength development and viscosity reduction when used in the mill base for flexo and gravure inks. With carbon blacks, it provides high pigment loadings, high jetness, and long-term stability.

TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect.

TEGO® DISPers 705 is a wetting and dispersing additive for solvent borne formulations. Stabilitzes inorganic pigments, fillers and bentonites. Can be used to produce very stable and easy to handle pastes of bentonites.

Bluesil™ FLD 48 V20 000 is polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl end groups.

Bluesil™ FLD 48 V6 000 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl endgroups.

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

SURFYNOL® DF-75 defoamer is an organic-based mineral oil-free additive designed to provide knockdown and sustained defoaming in a wide variety of water-based formulations. Performance benefits can be obtained when this product is incorporated into aqueous inks, overprint varnishes, coatings, adhesives and paper coatings. This compound is particularly useful for foam control in systems that are based upon acrylic resins.

Bluesil™ FLD 47 V1 000 is straight chained polydimethylsiloxanic fluids.

Bluesil™ FLD 47 V300 000 is dimethylpolysiloxane polymers with linear chains.