Products

Agimid® 141 B120-S is a plasticized, heat and light stabilized product with processing aid for extrusion. The main application is pneumatic tubes thanks to combination of cold impact, burst pressure and high aging resistances.

BS-1C-B27 is an organophilic clay designed for use in medium to high polarity systems.BS-1C-B27 imparts excellent rheology, particle suspension, and pigment anti-settling.

CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH (as low as 4) with excellent reactivity. CYMEL® 1172 resin cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response.

MACROLEX® Yellow 3G/OF is a dye used in plastics and elastomers.

AP 5604 is a low viscosity, Long Pot-life, modified aliphatic amine hardener for epoxy resins based coatings. Suitable for high solids or solvent free coatings.

EBECRYL® 286 is an aliphatic urethane diacrylate oligomer diluted 25% with tripropylene glycol diacrylate (TPGDA) monomer. Films of EBECRYL® 286 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

P-™10 Acid Low color castor oil fatty acids is castor oil fatty acids, derived from pure castor oil. P-™10 Acid Low color castor oil fatty acids is the building block for modifying many performance properties of a broad range of industrial chemicals. These performance enhanced chemicals are then used in a variety of consumer products, including paints, adhesives, soaps and inks.

ZHENGDA® ZM-160 is a 600 molecular weight polypropylene glycol monoamine, with methoxyethyl termination at the other end. The propylene oxide/ethylene oxide (PO/EO) mol ratio is 9/1. Polyetheramines of this type are useful in a variety of polymers because of the flexibility imparted by polyether groups.

ALPASTE® 7620NS is a chemical mixture. It is designed for use with plastics and is typically used in applications requiring specific chemical and physical properties. The product’s exact functionality in the context of plastics may include enhancing characteristics such as adhesion, resistance, or processing properties, depending on the specific formulation and application context.

ZOCO 104 is a medium particle size, high purity, zinc oxide excellent for applications where low surface area reactivit intermediate to ZOCO 103 and ZOCO 100 is required

HFGEL 120-C is an organophilic clay designed for use in medium to high polarity systems. HFGEL 120-C imparts excellent rheology, particle suspension, and pigment anti-settling.

Toyal 5606 is a spherical aluminum powder.