Products

D.E.H.® 87 is a high molecular weight phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A.

PARALOID™ B-99 50% Resin are effective pigment dispersants. They may also be blended with alkyds or nitrocellulose to improve the drying speed, gasoline resistance, and durability characteristics of the coating. They also provide significant upgrades to the gloss and hardness of other acrylic resins and other film formers when used as the grinding medium. PARALOID XR-34 is a slightly harder resin than PARALOID™ B-99 50% Resin.

OREVAC® 18732 is a maleic anhydride grafted polypropylene.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

LOTRYL® 28BA700T is a random ethylene-butyl acrylate copolymer.

PARALOID™ A-101 is a very hard methyl methacrylate polymer resin is recommended for clear coatings on vinyl, metal, and wood; gravure printing inks; plastisol primers; and barrier coatings for plastic. PARALOID A-101 has excellent adhesion to plastic; is fast drying; has excellent durability; and is highly resistant to water, grease, salt spray, and gasoline.

LOTADER® 9304T is a random ethylene-vinyl acetate-maleic anhydride terpolymer (EVA-MAH). As an ethylene copolymer, LOTADER® 9304T is compatible with PE in all proportions and with most ethylene copolymers. Vinyl acetate brings softness, flexibility, and polarity while maleic anhydride brings reactivity, leading to versatile adhesive properties to polar and non-polar substrates. As a result of high-pressure polymerization in a tubular reactor, LOTADER® 9304T also exhibits high transparency (low haze). LOTADER® 9304T is compatible with most tackifying resins and waxes and can be used in hot melt adhesives formulations. LOTADER® 9304T is also suitable to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminum foils, fiber mats, foams. LOTADER® 9304T can also be used as a tie layer between polyethylene and polyamide in blown film co-extrusion.