Products

B 2684 is a Ba/Zn Liquid Stabilizer.

DzBh Baling® SEBS YH-507 is a linear Hydrogenated Styrene- Butadiene Block Copolymer designed with middle molecular weight.

β-CEA is a mixture of reactive esters, each of which contain both acrylate and carboxylic acid functionality in the same molecule. Referring to the included structural formula, this mixture contains some unreacted acrylic acid (n=0), along with higher adducts of acrylic acid (n=1,2,3...). The dimer (n=1). β-CEA, is the largest single component, and the average molecular weight is equivalent to that of the dimer. β-CEA will polymerize when exposed to sources of free radicals. Because of its carboxylic acid functionality, β-CEA is useful as an adhesion promoter.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

PARALOID™ AU-608X Resin are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

ZHENGDA® ZM-1100 is a polyether monoamine of approximately 1000 molecular weight. With a PO/EO ratio of about 3/19, it is relatively hydrophilic. It is a white waxy solid at room temperature.

EBECRYL® 230 is an aliphatic urethane diacrylate characterized by its light color and low viscosity. Films of EBECRYL 230 cured via exposure to ultraviolet light (UV) or electron beam (EB) are soft and flexible, and are resistant to yellowing. EBECRYL 230 is often used as a modifier to improve the flexibility of finished formulations.

EBECRYL® 3720-HD20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) to provide a lower viscosity, easier handling product. EBECRYL 3720-HD20 exhibits light color and fast cure response. Films of EBECRYL 3720-HD20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

CYMEL® 304 Resin is a specially alkylated, high solids melamine crosslinking agent designed specifically for industrial wood coating applications. Systems formulated with CYMEL® 304 resin exhibit excellent catalyzed stability and films develop excellent early hardness, resistance properties, appearance, and cold check resistance. It has very low free formaldehyde and low evolved formaldehyde on cure relative to conventional urea-based formulas.

MARLOWET® 4588 functions as an emulsifier and hammer-finish agent used in solventborne and waterborne coatings.

Toyal TCP192 is used in electrical and electronics markets and is applied in thermal management.

AP 1063 is very a low viscosity, 100 % solids reactive Phenalkamine adduct hardener with improved blush resistance. It is suitable for low temperature curing of epoxy coating.

Addonyl® Kat NL is a premium cast Nylon 6 plastic, renowned for its high molecular weight and superior performance. Manufactured through an advanced anionic polymerization of caprolactam, this material is created via a pressureless casting process where molten monomeric caprolactam is poured into molds and directly polymerized. The result is a high-quality semi-finished product or molding with excellent mechanical properties and durability, ideal for demanding industrial applications.

EBECRYL® 8314 is an aliphatic urethane tetraacrylate diluted with the reactive diluents isobornyl acrylate (IBOA) and hydroxy propyl methacrylate (HPMA). Films of EBECRYL® 8314 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with excellent exterior durability properties. These performance properties make EBECRYL® 8314 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.