Products

KRONOS® 2047 is a special pigment for highly filled systems.

Calcinate® C-400CLR is a 400 TBN overbased calcium sulfonate. This highly overbased calcium sulfonate is engineered to have the alkaline component as all calcium carbonate. This product is used as a component in metal working fluids where the unique lubricity and extreme pressure properties of calcium carbonate are utilized. The calcium to sulfonate ratio is optimized for good oil solubility and compatibility with other formulating components. Calcinate® C-400CLR is compatible with most mineral base oils, white oils, and synthetic base stocks.

Corrosperse™ 176M is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone, It has a Fineness of Grind (7 Hegman) which means no grinding is required and it can easily be incorporated using high speed mixing techniques. Because the product is a pourable liquid, there are none of the concerns associated with Hexavalent Chrome in pigment form, specifically exposure to dust.

Hostavin® N 321 PILLS is a preparation containing a high molecular weight, sterically hindered amine and costabilizers.

Focus TBPP is a flame retardant and plasticizer with excellent compatibility, used in plastics and elastomers.

SUKOREZ® NX-710 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as metallocene catalyzed polyolefin(me-PO), ethylene vinyl acetate(EVA), styrene block copolymer(SBC) and amorphous polyalphaolefin(APAO).

CEAMPECTIN VIS 4011 is based on a high ester pectin, extracted from selected high quality citrus peel and standardized to obtain an uniform performance.

PC-2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC-2544™ Defoamer is also suggested for evaluation in specialty applications where efficient high temperature performance is required. Typical use levels of the defoamer solutions range from 50 - 500 ppm (20 - 200 ppm active polymer). The optimum level is dependent upon the nature of the oil, and it is therefore necessary to run a concentration profile on each oil.

EBECRYL® 8465 is used in radiation-curable coatings and functions as a binder and resin in CASE ingredients.

KRONOS® 2233 is a pigment compatible with ceramic substrates, used in coatings for glass, paper, plastic, and vitreous enamel, as well as in printing inks.

XP0183 Water-Reducible Alkyd is a water-reducible short oil chain stopped alkyd dissolved in Glycol Ether EB. Based on Tall Oil Fatty Acids, XP0183 may be reduced with water after appropriate neutralization with materials such as ammonia, triethylamine or DMEA. Baking enamel formulations can also be produced by adding appropriate amino resins.