Products

Dynasylan® SIVO 112 resembles a hydro- and oleophobic additive for Dynasylan® SIVO 110, a novel water-borne, sol-gel binder system.

CEAMTEX CH 92-906 is an alginate based product, standardized to obtain an uniform performance. Alginate is a natural hydrocolloid extracted from brown seaweeds SC.

Licocene® PE MS 431 granules are compatibilizers with good adhesion, cohesion, and heat resistance properties.

TEGO® Foamex 823 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of compatibility and long term effectiveness.

Rilsan® BMNO is a polyamide 11 produced from a renewable source. Rilsan® BMNO contains no additive and is specially designed for food contact application.

TEGO® Wet 290 shows excellent wetting and anti-crater properties with flow promotion in water borne coatings.

TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect.

CEAMLACTA 2388 is a carrageenan based product, standardized to obtain an uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class SC.

POLYGLYKOL B 11/150 K is a lubricating agent used in fluids and lubricants, particularly in metal processing and metalworking fluids applications.

DYNOL™ 360 is an organic-based superwetter providing great substrate wetting especially on difficult-to-wet substrates. DYNOL™ 360 also acts as a coalescing aid and is suitable for waterborne coatings and inks.

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

Bluesil™ SP 3304 is a non-hydrolysable polyether modified polydimethylsiloxane.

Rilsan® BMNO P40 TLD is a polyamide 11 produced from a renewable source. Rilsan® BMNO P40 TLD is plasticized and designed for injection molding.

Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colorless, nearly odorless low-viscosity liquid.

CEAMBLOOM WD 3193 is a stabiliser system based on carrageenan and other hydrocolloids, standardized to obtain an uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class SC.