Products

AP 8021 is a unique epoxy resin based on dimer acid chemistry. Especially, it has excellent adhesion, chemical resistance, toughness etc.

Bermocoll® EBM 8000 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

Aluminum Stearate 1032 is a medium bulk density, white powder.

MAINCOTE™ HG-750 is a binder and resin used in industrial markets.

MAINCOTE™ HG-54D has established the performance standard for acrylic waterborne maintenance paint vehicles. It can be formulated into primers and gloss topcoats which are designed for commercial, institutional, and industrial maintenance markets. The full gloss capability, corrosion resistance, flow, hardness, and chemical resistance characteristics imparted by MAINCOTE™ HG-54D Acrylic Resin in a waterborne finish are typical of those associated with conventional solvent-based maintenance systems. Primer formulations exhibit stability with commonly used corrosion-inhibiting pigments.

ZINC STEARATE SW-100 is a medium bulk density, fine white powder.

MAINCOTE™ HG-86 is a binder and resin used in primers, traffic paints, and waterborne paints. It features early rain resistance, easy application, excellent glass bead retention, fast drying, high durability, low VOC, night visibility, and prolongs wear life.

POLYCO™ 3103NP Emulsion Vinyl Acrylic Copolymer offers a good balance of properties for many paper and paperboard applications. The copolymer has excellent strength properties for offset printing, enhanced optical coverage for low brightness base stock and excellent glueability properties. Recommended for many paperboard applications requiring a balance of strength, printability, enhanced optical coverage and glueability, POLYCO™ 3103NP Vinyl Acrylic Copolymer is intended to provide the performance of POLYCO™ 3103 Acrylic Emulsion at even better value.

PARALOID™ AU-608B are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

PARALOID™ B-99 50% Resin are effective pigment dispersants. They may also be blended with alkyds or nitrocellulose to improve the drying speed, gasoline resistance, and durability characteristics of the coating. They also provide significant upgrades to the gloss and hardness of other acrylic resins and other film formers when used as the grinding medium. PARALOID XR-34 is a slightly harder resin than PARALOID™ B-99 50% Resin.

MAINCOTE™ 36 Emulsion is an aqueous hydrophobic acrylic copolymer that can be used as an anti-corrosive primer for metal substrates. Primers based on MAINCOTE™ 36 Emulsion have excellent adhesion to most metal substrates, including carbon steel, aluminum, and galvanized steel. MAINCOTE™ 36 Emulsion also has excellent water resistance and good corrosion resistance making it a good primer choice for industrial maintenance, DIY metal primers, and is also suitable for shop applications on structural steel where adhesion, water, and corrosion resistance are key requirements.

PM-2000-90 is an MDI-based polyester polyol urethane binder. It is designed for use in systems where medium processing times are required and lipophobic characteristics are desired.

MAINCOTE™ AE-58 is an aqueous acrylic emulsion copolymer which can be crosslinked with waterborne dispersions of epoxy resin in two-component acrylic/epoxy coatings. The resulting acrylic/epoxy coatings have properties such as low VOC, long pot life, and outstanding hardness, UV durability and solvent/chemical resistance. The high performance coatings can be used in a variety of interior and exterior applications for metal and concrete surfaces, such as institutional wall coatings and industrial metal primers, topcoats and direct-to-metal (DTM) coatings.

PARALOID™ B-48S 45% Resin has excellent adhesion to bare and primed metals and possesses outstanding toughness, flexibility, and exterior durability. PARALOID™ B-48S 45% Resin Thermoplastic Solution Resin (45%) has excellent block resistance and fast solvent release, and it is well suited for both air-dried and force-dried finishes. It is supplied at 45% solids in toluene and is also available in a solid grade (PARALOID™ B- 48N Solid Grade Thermoplastic Acrylic Resin).