Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Product Code
- MITM01864
- Single Ingredient
- Yes
- Synonyms
- Dibasic Zinc Stearate, Zinc Distearate, Zinc Salt Of Stearic Acid
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
ZINC STEARATE SW-100 Powder is produced from a high quality hydrogenated and distilllled fatty acid for applications requiring medium density processing aid with good flow and blending characteristics, including thermoset resins, polyolefins and powdered metal.
- Product Performance
Consistent physical properties and medium density provide excellent blending and dispersion properties with a large variety of materials. Relatively large particle size and medium density contributes minimally to initial viscosity in SMC mixes, allowing for good glass wet out, while providing good lubrication and surface quality in the molding process. Engineered particle size enhances blending properties with powdered metal and imparts consistent porosity for fabrication of self-lubricating components.
Applications & Uses
- Adhesive & Sealant End Applications
- Applicable Processes
- Compatible Polymers & Resins
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Markets
- Applications
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002958
- Principal
Storage & Handling
- Storage Conditions
Storage in dry areas at normal ambient temperatures is recommended. Open containers of unused product should be firmly closed for storage.
Other
- Appearance
- Fine white powder
- Appearance (SDS)
- Powder
- Color (SDS)
- White
- Flammable Nature (SDS)
- Combustible solids
- Item Number
- Odor (SDS)
- Slight
- Other Hazards
- Dust can form an explosive mixture in air
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Assay 13.2-14.2 % as zinc oxide - Physical Properties
Value Units Test Method / Conditions Bulk Density 18.0-23.0 lb/ft³ Moisture Content max. 1.0 % Sieve Fractionation (Retained) max. 0.2 % +100 Us Mesh - Material Composition
Value Units Test Method / Conditions Free Fatty Acids Content max. 1.0 % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.1 g/cm³ OECD 109 Flash Point (SDS) min. 100.0 °C Log Partition Coefficient (Log Pow) (SDS) 1.2 - OECD 107 Melting Point (SDS) 120.0-122.0 °C Kofler Hot Bar Melting Point (SDS) 120.0-122.0 °C OECD 102 Solubility In Water (SDS) 0.9 mg/L OECD 105 at 20°C pH (SDS) 7.0-9.0 - at 20°C