Products

CARPOL® GP-6015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an antioxidant package tailored for this type of market.

DOCCO 007 Gloss Oil is a 70% solids gloss rosin varnish dissolved in solvent naphtha. In comparison to DOCCO #006, DOCCO #007 Gloss Oil dries faster and to a higher hardness.

BARIUM STEARATE SW has medium bulk density, fine white powder.

TOYOCAT®-TF belongs to the tertiary amines chemical family and is used in industrial and industrial coatings markets.

Wayncor™ 226 is a premium multi-component corrosion inhibitor pigment that comprises distinctly different inhibitive species to provide a high degree of corrosion protection on ferrous substrates. Although versatile it is highly recommended for water based acrylic primers where a high degree of corrosion resistance is required. Typical use level is between 3 - 7% total formula weight.

Waynflash™ 111 is a liquid flash rust inhibitor which contains sodium nitrite as part of its flash rust inhibition matrix. It is a highly effective inhibitor for the flash rusting on ferrous substrates during aqueous paint phase. It has also proven to be affective in preventing in can rusting. Typical used levels range from 0.25 - 1.0% max. based upon total formula weight. It is highly versatile and can be used in any water based systems. WaynflashTM 111 exhibits good paint stability and can be incorporated at any stage of paint manufacturing. It is both HAPS and APEO free.

Polycin® D-265 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane coating systems. Polycin® D-265, with its very low viscosity, will allow for the formulation of higher system solids with improved VOC reduction. Polycin® D-265 will also impart the beneficial properties of castor oil derivatives, such as improved flow and leveling.

DzBh Baling® SIS YH-1128 a linear styrene/isoprene block copolymer. It has more diblock compared with other grades.

#1 Imported Castor Oil is a Technical Grade pure castor oil. Castor Oil, also known as Ricinus oil, is a triglyceride of fatty acids which occurs in the seed of the castor plant, Ricinus communis. #1 Imported Castor Oil is also available as DRY #1 Castor Oil with a moisture content of 0.02% maximum.

DzBh Baling® SIS YH-1105 is a linear styrene/isoprene block copolymer.

CARPOL® PGP-4000 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® PGP-4000 may also be included as a component in other urethane products and formulations.

LITHIUMSOAP I is a medium bulk density fine white powder.

40 Oil - Polymerized Castor Oil at the double bond yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks, and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil, and solvent resistance.

Bermocoll® EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

TMPTA is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance.