Products

MAINCOTE™ IC-1002 is a hydrophobic acrylic-styrene copolymer with excellent flexibility and adhesion to metal substrates. This versatile binder can be combined with low thermal conductivity fillers to form waterborne thermal insulation coatings with high pigment volume concentrations (PVC), high volume solids and low VOC levels (< 25 g/L). MAINCOTE™ IC-1002 Emulsion offers uniform cure in high build insulation coatings.

ZHENGDA® ZD-1400 Polyether amine(also called Amine-terminated Polyether) is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, ZHENGDA® ZD-1400 Amine-terminated Polyether is a difunctional, primary amine with average molecular weight of about 4000. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains.

CYMEL® 1125 resin is a highly methylated/ethylated, carboxyl-modified benzoguanamine crosslinker supplied in 2-butoxy ethanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and detergent resistance. The structure of CYMEL® 1125 resin offers superior adhesion to metal substrates. CYMEL® 1125 resin can be used in a wide range of general purpose industrial finishes. However, because CYMEL® 1125 resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc, it is recommended for use in only dark single coat applications or primers, and not in pastel colors. Benzoguanamine resins have poor resistance to UV light, hence CYMEL® 1125 is not suitable for exterior applications

EBECRYL® 4266 is a Unsaturated aromatic epoxy acrylate. In the formulation of UV-curing and EB coatings. Without reactive thinner.

EBECRYL® P39 is a polymeric benzophenone derivative that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. Recommended levels are from 8 to 10% based on total formulation. EBECRYL® P39 should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100, or with amine modified acrylate resins. EBECRYL® P39 is a polymer preparation manufactured in the European Union with (pre)registered monomers/reactants and REACH compliant.

RHOPLEX® 2500 is designed for tough, water-resistant masonry paints and primers. Coatings based on RHOPLEX® 2500 possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), and the ability to retard efflorescence in cured cementitious products.

PARALOID™ A-21 100% Resin imparts excellent intercoat adhesion, hardness, and outdoor durability. It has the same composition and characteristics as the solution grade, while providing wider formulating latitude.

Thetawet™ FS-8150 is a nonionic surfactant used in caulks, home care applications such as bottle wash, degreasers, floor cleaners, and household cleaners, as well as in industrial and institutional cleaning including bottle wash, degreasers, and industrial cleaners.

MAINCOTE™ 4950 Resin is an aqueous acrylic emulsion polymer that facilitates the formulation of coatings to less than or equal to 50 g/L VOC for use in light to medium duty maintenance and protective coatings applications and general industrial metal finishing applications. It offers excellent exterior durability and corrosion resistance, and ease of formulation with excellent paint stability. MAINCOTE 4950 Resin offers improved corrosion resistance versus current direct-to-metal (DTM) finish coats formulated below 100 g/L. It also offers good architectural gloss and trim paint properties. Low coalescent demand allows compliance with stringent VOC regulations.

OREVAC® 18730 is a maleic anhydride modified polypropylene.

SURFONIC® DA-9 is the nine-mole ethoxylate of isodecyl alcohol. It is a water soluble, nonionic surface-active agent which is compatible with other nonionic surfactants and also with most anionic and cationic surfactants.

TEGO® Therm HPG 4000 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 4000 can be combined with other materials to produce thermal insulation coatings.

EBECRYL® 3203 is a low viscosity modified Bisphenol-A based epoxy acrylate oligomer that provides exceptional pigment wetting properties for black and white inorganic pigments and fillers. EBECRYL® 3203 gives a fast cure response when formulated with other oligomers cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 3203 is used for the preparation of high pigment loading pigment pastes produced using a 3-roll mill or bead mill.

WHITE FONOLINE® Petrolatum is used in fluids and lubricants, food and nutrition, healthcare and pharma, industrial, and personal care markets.

PARALOID™ A-11 provides excellent color and color retention, high hardness, and excellent resistance to alcohol and water. It has properties similar to PARALOID™ A-11 Thermoplastic Solution Resins and is used in similar applications. PARALOID™ A-11 Solid Grade Thermoplastic Acrylic Resin is compatible with several other PARALOID™ A-11 resins such as PARALOID™ A-21 Solid Grade Thermoplastic Acrylic Resin, PARALOID™ B-44 Solid Grade Thermoplastic Acrylic Resin, and PARALOID™ B-82 Solid Grade Thermoplastic Acrylic Resin and with other film formers including cellulosic, vinyl, silicone, and epoxy.