Products

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

Baeropan® MC 90495 KA is a Ca/Zn Solid Stabilizer.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

DzBh Baling® YH-1126 is a linear styrene/isoprene block copolymer.

EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL® 8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, good toughness and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

CALCIUM STEARATE/ZINC STEARATE 11 BUSA is a high bulk density, free flowing granular powder.

AP 5660 is a low viscosity, modified aliphatic amine hardener for epoxy resins based coatings at ambient and elevated temperature curing.

EBECRYL®1291 is a hexafunctional aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL®1291 exhibit high hardness, abrasion and solvent resistance.

NYONOL™ LP-250 is a water insoluble polyalkene glycol (PAG). It is a clear liquid at room temperature with a low vapor pressure. NYONOL™ LP-250 exhibits excellent lubricity and can be used in various industrial lubricating applications.

ACS781608 BURNT UMBER is low in viscosity, high in color strength, and maintain excellent stability. Possible applications for the ACS line include but are not limited to aerosols, industrial coatings, architectural coatings, graphic films, floor coatings, wood finishes, concrete finishes, and adhesives.

VANCRYL® 950 emulsion is a very low Tg acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 950 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 950 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 950 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.48.

EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL® 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films ofEBECRYL® 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule. Over time, EBECRYL® 8701 may crystallize to a waxy solid form.

EBECRYL® 53 is a purified grade of OTA 480, especially developed for formulating ultraviolet light (UV) and electron beam (EB) curable printing inks and overprint varnishes for food packaging applications. The purification process removes impurities that are potential sources for odor and extractables in cured products.

VANCRYL® 800 is a styrene/acrylic copolymer used in waterborne inks and coatings for graphic arts applications. VANCRYL® 800 provides pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL 800 are excellent. VANCRYL® 800 is also effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.