Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM12355
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
UV/EB cured products based on EBECRYL® 8894 are characterized by the following performance properties:
- Excellent humidity resistance
- Excellent toughness
- Good abrasion resistance
- Non-yellowing
The actual properties of UV/EB cured formulations containing EBECRYL® 8894 will depend on the selection of the other formulation components, such as co- resins, suitable additives, reactive diluents and photoinitiators.
Applications & Uses
- Application Method
- Cure Method
- Product Applications
Formulated UV/EB curable products containing EBECRYL® 8894 may be applied by spray coating, screen, roller and curtain coating methods. EBECRYL 8894 is recommended for use in coatings requiring:
- Excellent humidity resistance
- Exterior durability
- Flexibility
- In-mold decoration
Properties
- Physical Form
- Note
- ¹ - Measured on an 80 micron EB-cured film. Stress-strain testing was carried out at 23°C, 50% relative humidity, 50mm/min. crosshead speed
- ² - Maximum of the tan(δ) peak measured by dynamical mechanical analysis (1Hz, tensile mode).
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling.
- Keep container tightly closed.
- Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Viscous liquid
- Color (SDS)
- Clear water white to a pale yellow
- IATA/ICAO Proper Shipping Name
- Resin solution
- IATA/ICAO UN Number
- UN1866
- IMO/IMDG Proper Shipping Name
- Resin solution
- IMO/IMDG UN Number
- UN1866
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Acetate
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight , Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- TDG Canada Proper Shipping Name
- Resin solution
- TDG Canada UN Number
- UN1866
- USA/DOT Proper Shipping Name
- Resin solution
- USA/DOT UN Number
- UN1866
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 1.0 Gardner Gardner Gardner Color Scale - Mechanical Properties
Value Units Test Method / Conditions Tensile Elongation 37.0 % % stress-strain testing was carried out at 23°C, 50% relative humidity, 50 mm/min. crosshead speed Tensile Modulus 61786.0 psi psi stress-strain testing was carried out at 23°C, 50% relative humidity, 50 mm/min. crosshead speed Tensile Strength 4061.0 psi psi stress-strain testing was carried out at 23°C, 50% relative humidity, 50 mm/min. crosshead speed - Physical Properties
Value Units Test Method / Conditions Density 1.07 g/mL g/mL At 25°C Glass Transition Temperature (Tg) 60.0 °C °C Dynamic Mechanical Analysis (DMA) at 23°C stress-strain testing was carried , 50% relative humidity, 50 mm/min. crosshead speed, measured on an 80 micron EB cured film, maximum of the tan(δ) peak Viscosity 65000.0 mPa.s mPa.s At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.995 g/cm³ g/cm³ Flash Point (SDS) 23.0 °C °C Volatile Content (SDS) 15.0 %(W/W) %(W/W)