Products

GRANOLITE® TEG is a triethylene glycol- esterified rosin resin with low viscosity and very low VOC content. Thanks to its low viscosity, it flows easily and is ideal for use as a tackifier and plasticizing agent in various adhesive formulations, particularly for construction.

VERSAL RED A3BN is a pigment used in flexography, gravure printing, and offset & lithographic printing. It is compatible with polyolefins, polyvinyl chloride (PVC), and nitrocellulose, and is used in plastics and elastomers.

CYREZ® 963 is a crosslinking agent from the chemical mixtures and blends family, used in plastics and elastomers.

Synesstic™ 12 represent a unique class of API Group V category fluids. Synesstic™ AN products offer improved hydrolytic, thermal and oxidative stability versus other Group V fluids. SynessticTM AN products are particularly suited for use as a blendstocks in synthetic lubricant applications that require high stability under extreme operating conditions.

CIMBAR 325 is used as a filler and pigment in adhesives and sealants, carpet, ceramics and refractory, metal manufacturing and finishing, and paints and coatings. It is also applied in copper smelting, frictionizing, and sound deadening processes.

TOYOCAT®-TE belongs to the tertiary amines chemical family and is used in industrial coatings markets.

EBECRYL® 3700-20T is the bisphenol A epoxy diacrylate, EBECRYL 3700, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1), to provide a lower viscosity, easier handling product. EBECRYL 3700- 20T exhibits very fast cure response and low odor. Films of EBECRYL® 3700-20T cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, scratch resistance, and excellent chemical resistance.

WWT882192 Medium Gray is a pigment used in adhesives and sealants, and architectural coatings. It is compatible with concrete substrates.

Polyfill 130A is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

AQUAPOL® PI-13000-31 Prepolymer is an aliphatic urethane, end-capped prepolymer con- taining un-reacted isophorone diisocyanate (IPDI). Aquapol PI-13000-31 prepolymer will gel up to five times its weight of water and can be used to form stable gels with water. In contrast, concentrations of Aquapol PI-13000-31 prepolymer above 50% will result in closed cell foam rather than a gel. Gels will lose water to the atmosphere and should be protected with an impermeable membrane. The speed of reaction can be increased or decreased by using warm or cold water respectively and by the concentration of the amine catalyst. Using cold water will reduce any tendency toward frothiness.

Baerostab® CT 9169 XRF is a calcium-zinc-based stabilizer designed for use in plastisol applications. It offers cost-effective stabilization while providing excellent heat stability. This stabilizer is ideal for use in plastics and elastomers, particularly in applications that require good heat resistance. Its primary function is to act as a stabilizer, ensuring improved performance and durability of plastisol products.

Europrene® SOL T 9113 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 18 % wt and diblock content is 8 %. A non-staining, TNPP free antioxidant system is added during the production process.

CIMBAR CG-60 is the leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

Castorwax® DS-270 is a wax-like compound obtained by the controlled hydrogenation of pure castor oil, which occurs in the seed of the castor plant, Ricinus communis. Castorwax® DS-270 is highly compatible with a variety of plastics and resin systems and has limited solubility in organic solvents, which will reduce additive an integral part of the cured film. the possibility of its being washed or leached out of the final product Castorwax® DS-270 also has an available reactive hydroxyl group which, if desired, can be utilized to react into the cured film making the additive an integral part of the cured film.