Products

KRYSTOL™ 350 is a white mineral oil lubricant used as an internal lubricant in plastics and elastomers.

Wayncor™ 205 is an anti corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. Its near neutral pH allows it to be used in a wide variety of formulas without a negative impact on paint stability. The fine Hegman grind (6.5 minimum) permits its use in thin film applications (4 - 10 microns) such as coil coatings and in more traditional industrial applications where the dry film thickness is higher. This fine Hegman value also allows the product to be high speed dispersed. The Wayncor™ 205 mechanism works well on both ferrous and non-ferrous substrates. Wayncor™ 205 can be used as the sole corrosion inhibitor or synergistically with other inhibitive technologies.

MACROLEX® Blue RR is a dye with reduced dusting, used in plastics and elastomers for household goods and toys.

Rostabil DDPP is an antioxidant and thermal stabilizer used in lubricants and functional fluids, paints and coatings, and plastics and elastomers. It functions as a heat stabilizer and general stabilizer.

NOVEL® 1216CO-7 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. ALFONIC 1216CO-7 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)7OH where ‘x’ varies between 11 and 15. The narrow range version of this ethoxylate made using Sasol Chemicals patented NOVEL catalyst technology is also available.

Bluesil™ EMUL 9500 is a general purpose, silicone emulsion of silanol terminated polysiloxane polymers. Bluesil™ EMUL 9500 can be used as is or in conjunction with a tin catalyst to make a fully crosslinkable coating.

Esterex™ NP451 is a API category Group V fluids. Esterex™ NP451 has excellent low temperature properties, good lubricating properties, and low volatilities. Esterex™ NP451 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ NP451 is ideal for use in highly loaded, high speed lubricant applications where energy efficiency is desired.

AP 5180 is a chemical blend used as a curing agent in various resin systems. It is commonly employed in CASE (Coatings, Adhesives, Sealants, and Elastomers) applications to promote the curing process. The product consists of a mixture of chemical components, providing effective curing properties for different industrial applications.

Bayferrox® 640 is a blend of inorganic iron oxide pigments, including Pigment Black 11 and Pigment Red 101. It is used in various applications requiring inorganic pigments.

MILLIONATE® NM is containing a higher amount of 2,4’-diphenylmethane diisocyanate, and being liquid at room temperature and easy to handle.

ROCIMA™ BT 2S Industrial Microbicide is a preservative and microbicide used in agrochemicals, fluids and lubricants, industrial additives, and plastics and elastomers.

HP9891-TOFA Short Oil Alkyd is a short oil, chain-stopped alkyd resin based on Tall Oil Fatty Acid for air-dry spray paints and baking enamels. It exhibits good overbake resistance

Licocene® PP 2602 granules are ethylene/propylene copolymer waxes used in hot melt adhesives.

Sonneborn® PD-23 meets the Low Vapor Pressure - Volatile Organic Compounds (LVP-VOC) exemption criteria under the California Air Resource Board (CARB) Method 310 section 3.6.2. It meets the boiling point threshold (>216°C) as defined in Method 310, using ASTM D86-11. As such Sonneborn® PD-23 may be considered a non-reportable VOC in calculations of the VOC contents of regulated consumer product categories in the California Consumer Product Regulations.

EVATANE® 28-05 is a random ethylene-vinyl acetate copolymer.