Products

Staybelite® Resin is gum rosin that has been partially hydrogenated via a catalytic process. It is a pale, thermoplastic, acidic resin, Hydrogenation makes this resin highly resistant to oxidation and discoloration and to changes in solubility characteristics, when it is exposed to air and heat. In these respects, it is greatly superior to ordinary non- hydrogenated rosins.

CYMEL® U-663 resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties combined with very good block resistance makes CYMEL® U-663 resin suitable for acid curing wood coating applications where low formaldehyde emission and high film gloss is required.

EVOQUE™ 3150C was engineered to enhance titanium dioxide efficiency, providing improved hiding or equivalent hiding at a reduced titanium dioxide usage level. This acrylic emulsion incorporates ambient crosslinking technology, which improves household stain resistance performance and chemical resistance properties. Based on prior commercial iterations of EVOQUE™ technology, the overall exterior durability is anticipated to be excellent.

Additin® M 97.001 is a chemical mixture used as an additive package in gear oils, industrial oils, and metalworking fluids. It provides excellent wear resistance and extreme pressure performance. The product is suitable for applications like broaching oil, gear oils, industrial lubricants, and machining oils.

EBECRYL® 3300 is a highly reactive epoxy acrylate, diluted in DPGDA. When formulated and cross-linked with other suitable radiation curable oligomers and reactive diluents, it results in durable, hard-elastic and chemically resistant coating films of high quality. For UV curing a suitable photoinitiator must be added to the formulation. The addition level depends on the line speed, number of lamps and thickness of the coating film.

EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties.

SURFONIC® L24-22 is the 22-mole ethoxylate of linear, primary 12-14 carbon number alcohol. It is a water-soluble, nonionic surface-active agent which is compatible with other nonionic surfactants and with most anionic and cationic surfactants. The product is a white, waxy solid at room temperature.

EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. EBECRYL® LEO 10801 has been specifically developed to formulate UV/EB curable inks with low extractables and low odor for indirect food contact applications.

EBECRYL® 889 is an energy curable polyester acrylate for publication inks. EBECRYL® 889 provides good pigment wetting and color development for process color inks. Inks made with EBECRYL® 889 exhibit good adhesion to super- calendared paper, good ink transfer and excellent printability.

CEAMLACTA DB 94-200 is used in food & nutrition applications for creams.

XIBOND® 235 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

VANCRYL® 65 is a medium molecular weight solid acrylic resin that is soluble in alkaline water solutions. Ammonia or other bases may be used as neutralizing agents. Co-solvents such as isopropanol are not required in making the solution, thus facilitating the preparation of low VOC inks and coatings. VANCRYL® 65 provides outstanding properties for high-solids gravure inks and waterborne clear overprint varnishes. The lower viscosity characteristics in solution of VANCRYL 65 allow the preparation of high solids inks and coatings, where high gloss and rapid drying are essential. Coatings prepared with VANCRYL® 65 have high gloss, scuff resistance, hardness, and excellent resolubility. VANCRYL® 65 is compatible with most acrylic and maleic resins. VANCRYL® 65 is also effective as a protective colloid in the production of styrene acrylic copolymer emulsions.