Products

VERSAL RED DP3G is a pigment used in various applications, including decorative paints, industrial coatings, offset and lithographic printing, and wallcoverings and decorative laminates. It is compatible with plasticized polyvinyl chloride (PVC-P), polyolefins, and polypropylenes (PP), as well as nitrocellulose. This pigment is designed to enhance the color in plastics and elastomers.

SILIKOTOP® E 901 is a binder and resin used in 2K coatings, protective coatings, solventborne coatings, and solventless and high solids coatings. It features good dye affinity, high viscosity, low VOC, and weather resistance.

Monarch is a petrolatum-based hydrocarbon used in food and nutrition, healthcare and pharma, industrial, and personal care markets.

ACRYSOL™ RM-2020 E is a solvent-free, non-ionic, urethane associative thickener offering very versatile means of formulating paints with an optimal film build and high shear viscosity. It is specifically designed for applications where a low odour or low VOC is required and specific environmental requirements are needed.

POLYGLYKOL D 21/150 is used in metalworking fluids within the fluids and lubricants market. It functions as a humectant and solvent in case ingredients, a lubricating agent in fluids and lubricants, a defoamer in food ingredients, and a lubricant in industrial additives.

General Catalyst GC-008 is a kind of indoor and outdoor general type catalyst, it is self-crosslinking, can improve the adhesion of the film, does not affect the flow and gloss, has the effect of anti-yellowing property. It can completely improve the mechanical properties of the film when cures at 160 degrees to 200 degrees. It can be used as a curing accelerator for epoxy powder coating, epoxy/polyester powder coating and pure polyester /TGIC powder coating to improve curing effect, or as an internal catalyst containing carboxyl polyester resins to reduce curing temperature or shorten curing time. In indoor and outdoor system, curing condition can achieve 160 degrees /15-20 minutes, 170 degrees /10-15 minutes, 200 degrees /3-5 minutes , flow and mechanical properties are good.GC-008 could completely replace imidazoles, diphenylimidazoline and other catalysts which are easy to get yellowing and affect the leveling and storage stability, General Catalyst GC-008 is the upgrading product of them.

Baling® SEPS YH-4010 is a 37% combined styrene content and 100% diblock content. The product is powder and cosmetic white oil thickening, cosmetic water retention ointment. The product has stable physical and chemical properties, good viscosity-temperature performance, and is easy to pump into the fiber when it is applied to the optical fiber filling grease, and has a low oil separation rate.

RHOPLEX® EC-3814 is designed to provide elastomeric coatings with an excellent balance of elongation, tensile strength and dirt pickup resistance over a wide temperature range. RHOPLEX® EC-3814 retains this balance of properties over formulation ranges not previously attainable for elastomeric wall coatings. RHOPLEX® EC-3814 can also be formulated at a higher PVC than Dow’s other elastomeric binders, which can lead to formulated cost savings, while still maintaining excellent mechanical properties. Furthermore, it shows a dramatic improvement in alkali resistance over hot masonry substrates compared to other elastomeric binders.

RHOPLEX® 4400 is a 100% acrylic latex binder designed to provide wide formulation latitude for caulks and sealants. These high solids, low Tg emulsion can be formulated without plasticizer to meet the performance requirements of ASTM C920 Class 12.5 to 35 and ASTM C-834 Grade -18°. Sealants formulated with RHOPLEX® 4400 provide reduced dirt pick-up, mildew growth and paint discoloration, as well as excellent weatherability.

3M™ Glass Bubbles S22 is specially formulated for a high strength-to-weight ratio. This allows greater survivability under many demanding processing conditions, such as injection molding. They also produce stable voids, which results in low thermal conductivity and a low dielectric constant. 3M glass bubbles are available in a variety of sizes and grades to help you meet your product and processing requirements.

DERMULSENE® TR 501 is an aqueous, solvent free resin dispersion based on terpene phenolic resin.

D.E.N.® 438-MK75 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl isobutyl ketone.