Visit palmerholland.com
All Categories
All Categories
Products
4664
Brands
321
Documents
6951
Technologies
Markets
Products
Palmer Holland, Inc.
Matching Product
Technologies
(7)
Show All 7 Categories
CASE
Base Chemicals & Intermediates
Elastomers
Industrial Additives & Materials
Fluids & Lubricants
Cleaning Ingredients
Plastics
CASE
Base Chemicals & Intermediates
Elastomers
Industrial Additives & Materials
Fluids & Lubricants
Cleaning Ingredients
Plastics
Markets
Labeling Claims
Physical Form
Principal
All Filters
87 Products
found on Palmer Holland, Inc.
Most Viewed
Palmer Holland, Inc.
CARPOL® TEAP-265
Principal:
Carpenter Co
Functions:
Crosslinking Agent
Chemical Family:
Polyethers
End Uses:
Insulation Materials, Rigid Boardstocks, Rigid Foams
Features:
High Reactivity
CARPOL® TEAP-265 is a triethanolamine-initiated polyether polyol. The resultant material has a nominal functionality of three and a typical hydroxyl number of 635. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. Primarily used as a rigid polyol modifier, CARPOL® TEAP-265 can be used to cut the high viscosity seen with most sucrose based rigid polyols while acting as a good crosslinker. In addition, this polyol contains amine which enhances the overall system reactivity.
Palmer Holland, Inc.
CARPOL® GP-1000-60
Principal:
Carpenter Co
Chemical Family:
Polyethers
Chemical Name:
Polyoxyalkylene Triol
End Uses:
Urethane
Labeling Claims:
Not Listed In California Proposition 65
CARPOL® GP-1000-60 Polyolis a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1000-60 Polyol may also be included as a component in other urethane products and formulations.
Palmer Holland, Inc.
CARPOL® GP-3000-60
Principal:
Carpenter Co
Chemical Family:
Polyethers
Chemical Name:
Polyoxyalkylene Triol
End Uses:
Elastomers, Urethane
Labeling Claims:
Not Listed In California Proposition 65
CARPOL® GP-3000-60 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-3000-60 may also be included as a component in other urethane products and formulations.
Palmer Holland, Inc.
CARPOL® GP-3000
Principal:
Carpenter Co
Chemical Family:
Polyethers
Chemical Name:
Polyoxyalkylene Triol
End Uses:
Urethane
CARPOL® GP-3000 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-3000 may also be included as a component in other urethane products and formulations.
Palmer Holland, Inc.
PEBAX® Rnew® 55R53 SP 01
Principal:
Arkema High Performance Polymers
Polymer Name:
Polyether Block Amide (PEBA)
Processing Methods:
Casting, Extrusion, Film Extrusion, Injection Molding, Profile Extrusion, Thermoforming, Transfer Molding
End Uses:
Footwear, Transmission Components
PEBAX® Rnew® 55R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. PEBAX® Rnew® 55R53 SP 01 has been developed to be heat and UV resistant.
Palmer Holland, Inc.
CARPOL® NIONIC™ L-64
Principal:
Carpenter Co
Functions:
Surfactant, Surfactant, Surfactant, Surfactant (Nonionic), Surfactant (Nonionic)
Chemical Family:
Polyethers
Labeling Claims:
Not Listed In California Proposition 65
Palmer Holland, Inc.
PTMEG-1400
Principal:
Korea PTG Co., Ltd.
Chemical Family:
Polyethers
End Uses:
Polyurethanes, Spandex, Synthetic Leather
Chemical Name:
Polytetramethylene Ether Glycol
Features:
High Reactivity
Palmer Holland, Inc.
CARPOL® PGP-2740
Principal:
Carpenter Co
Chemical Family:
Polyethers
Chemical Name:
Glycols, polyethylene-polypropylene
End Uses:
Binder, Caulks, Caulks, Elastomers, Rigid Foams, Sport Floor, Sports Applications, Spray Coatings, Urethane
Features:
High Reactivity, Hydrophilic
Labeling Claims:
Not Listed In California Proposition 65
CARPOL® PGP-2740 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2740 has a functionality of two and an average molecular weight of 2700 Da. This diol is polymerized with propylene oxide and then capped with 40% ethylene oxide. The outcome is a polyol with enhanced reactivity and hydrophilicity.
Palmer Holland, Inc.
PTMEG-1800
Principal:
Korea PTG Co., Ltd.
Chemical Family:
Polyethers
End Uses:
Polyurethanes, Spandex, Synthetic Leather
Chemical Name:
Polytetramethylene Ether Glycol
Features:
High Reactivity
Palmer Holland, Inc.
MARLOWET® 4560
Principal:
SASOL Germany GmbH
Functions:
Co-Emulsifier, Emulsifier, Surfactant, Surfactant (Anionic)
End Uses:
Metalworking Fluids
Chemical Family:
Alcohol Ethoxylates, Carboxylates, Polyethers
Palmer Holland, Inc.
PEBAX® 4033 SP 01
Principal:
Arkema High Performance Polymers
Polymer Name:
Polyether Block Amide (PEBA)
Processing Methods:
Casting, Extrusion, Film Extrusion, Injection Molding, Profile Extrusion, Thermoforming, Transfer Molding
End Uses:
Gears, Transmission Components
PEBAX® 4033 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 4033 SP 01 has been developed to be heat and UV resistant.
Palmer Holland, Inc.
CARPOL® GP-4520-55
Principal:
Carpenter Co
Chemical Family:
Polyethers
Chemical Name:
Glycerol ethoxylated propoxylated
End Uses:
Elastomers, Urethane
Labeling Claims:
Not Listed In California Proposition 65
CARPOL® GP-4520-55 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4500 Da. This triol is polymerized with propylene oxide and then capped with 20% ethylene oxide. Main applications include C.A.S.E., however, CARPOL® GP-4520-55 may also be included as a component in other urethane products and formulations.
Palmer Holland, Inc.
CARPOL® NIONIC™ L-101
Principal:
Carpenter Co
Functions:
Defoamer, Defoamer, Surfactant, Surfactant, Surfactant (Nonionic), Surfactant (Nonionic), Wetting Agent, Wetting Agent
Chemical Family:
Polyethers
End Uses:
Defoamers, Wetting Agent
Applicable Processes:
Coatings Manufacturing, Emulsion Polymerization, Fermentation, Metalworking Applications, Paint Manufacturing, Water Treatment
Labeling Claims:
Not Listed In California Proposition 65
Features:
Excellent Chemical Stability, Excellent Rinsability, Foam Control, Good Chemical Stability, Good Steric Stabilization, Good Thermal Stability, Low Temperature Foam Control, Low Temperature Foam Control, Provides Steric Stabilisation, Rinsable, Thermal Stability
CARPOL® NIONIC™ L-101 Surfactant is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® NIONIC™ L-101 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ L-101 is a good general/low temperature defoamer. They are water soluble at low temperatures and will flocculate when warmed above their cloud point
Palmer Holland, Inc.
CARPOL® GP-725
Principal:
Carpenter Co
Chemical Family:
Polyethers
End Uses:
Elastomers, Urethane
Chemical Name:
Glycerol ethoxylated propoxylated
Features:
High Reactivity
Labeling Claims:
Conflict Minerals-free, Not Listed In California Proposition 65
CARPOL® GP-725 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® GP-700. Main applications include C.A.S.E., however, CARPOL® GP-725 may also be included as a component in other urethane products and applications.
Palmer Holland, Inc.
PEBAX® 4533 SA 01
Principal:
Arkema High Performance Polymers
Polymer Name:
Polyether Block Amide (PEBA)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Gears
PEBAX® 4533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 4533 SA 01 is specially designed to food uses.
Show
15
of 87 results
1
2
3
4
5
6
