Products

CRAYVALLAC® PA4 BA 20 is a HAPs-free rheology modifier pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® LA-250 is a modified urea dissolved in DMSO and is a pourable liquid rheology modifier for post addition to low polarity solvent based coatings. CRAYVALLAC® LA-250 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.

CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

OPTI-MATT™ A-2000LV Duller is a silica-free duller with enhanced dulling capabilities, soft touch, and excellent product stability. It is designed to be the “dull” component for esthetically appealing furniture leather topcoats with high physical performance requirements. This duller offers a soft touch to topcoat finishes and enables good physical performance, including exceptional burnish resistance and excellent rub fastness and flexibility. It is supplied as a low medium viscosity liquid that is particularly easy to handle and formulate, while retaining good storage stability. Minimal mixing is required to help ensure uniformity.

ACEMATT® OK 630 is a wax-treated, medium particle-sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings.

CRAYVALLAC® PA3 BA 20 is a HAPs-free pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity).CRAYVALLAC® PA3 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® PA4 X 20 is a rheology modifier pre-activated amide wax supplied in a mixture of xylene and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 X 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

NuTone® 313 is a general purpose carbon black. It has better jetness with good dispersibility. It is primarily designed considering the high jetness requirement for fertilizer coating, leather coating and printing inks applications.

WANNATE® H1210 is a kind of monomeric cycloaliphatic diisocyanate which is colorless or light yellow liquid with low viscosity.

ACEMATT® TS 100 is an untreated thermal silica with outstanding properties. It provides very high efficiency and transparency. It can be used in a large variety of coatings.

NuTone® 36 is a medium structure specialty black pigment that gives good dispersion.

ROYALE BLACK® PP131 is specially developed for plastics applications typically for PE, PP, PVC, EVA, PA6 and PA66 compounds for automotive, electronic, home appliance, footwear and film applications. Morphological properties of ROYALE BLACK® PP131 are balanced in such a way that it provides a good combination of dispersibility and color strength and it offers very good UV protection and smooth surface finish. It has high purity with very low sulfur, ash and exhibits low moisture absorption and it improves mechanical durability even at high temperature and direct sun light applications. ROYALE BLACK® PP131 is suitable for indirect food contact applications conforming to EC 10/2011 and recommended for all general purpose masterbatch, PVC masterbatch and direct compounding applications. ROYALE BLACK® PP131 is also recommended for water base and; solvent base ink applications.