Products

MAINCOTE™ PR-71 is used for all protective coating applications, the first need is for adhesion to and passivation of the substrate. In the past, difficult-to-adhere-to substrates were often treated with a vinyl wash primer to passivate the substrate and provide adhesion for subsequent coats. These vinyl wash primers are increasingly difficult to use as they are very low in solids, high in VOC, and contain toxic pigments. In contrast, MAINCOTE™ PR-71 Waterborne Acrylic Resin allows the coatings manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer.

MAINCOTE™ AE-58 is an aqueous acrylic emulsion copolymer which can be crosslinked with waterborne dispersions of epoxy resin in two-component acrylic/epoxy coatings. The resulting acrylic/epoxy coatings have properties such as low VOC, long pot life, and outstanding hardness, UV durability and solvent/chemical resistance. The high performance coatings can be used in a variety of interior and exterior applications for metal and concrete surfaces, such as institutional wall coatings and industrial metal primers, topcoats and direct-to-metal (DTM) coatings.

MAINCOTE™ HG-56 is an aqueous emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D Acrylic Resin, its somewhat larger particle size mandates that it be formulated in a different manner. The formulator should pay particular attention to the guidelines in this brochure.

ACEMATT® TS 100 is an untreated thermal silica with outstanding properties. It provides very high efficiency and transparency. It can be used in a large variety of coatings.

TEGO® Flow 425 is a universal, siloxane-based flow and anti-crater additive. It is highly compatible and suitable for a broad range of coatings.

AddWorks® LXR™ 314 is a mixture of a triazine UV absorber with a non basic hindered amine light stabilizer (HALS), designed for high performance stabilization of paints and clearcoats, and characterized by its broad compatibilities in both solventborne and waterborne coatings.

Hostavin® 3070 disp. is a 52% aqueous dispersion of an oligomeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration, low extraction and very low tox-profile.

ACEMATT® 810 is an untreated, coarse particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

TEGO® Glide 100 is highly compatible and suitable for a multitude of applications. It provides outstanding flow and leveling properties and medium slip.

DYNOL™ 800 has the ability to reduce both static and dynamic surface tension in waterborne coatings and inks. DYNOL™ 800 is an excellent choice for difficult-to-wet substrates requiring good flow and leveling.

DYNOL™ 604 is an acetylenic diol based super wetter providing very good static and dynamic surface tension reduction in waterborne coatings and inks.

RHOPLEX® PR-33 is an aqueous, all-acrylic, binder designed for exterior and interior primers and stain blocking sealers. This binder uses ambient cross linking technology to offer improved primer performance versus conventional latex polymers. The combination of an all-acrylic backbone and ambient cure crosslinking technology contribute to the excellent balance of properties found with RHOPLEX® PR-33 Emulsion Polymer. The excellent film formation achieved blocks stains from migrating through the dry paint film and yields stain blocking performance at high PVC. Enhanced adhesion and excellent durability are additional attributes of this technology.

EBECRYL® 645 functions as a binder and resin in CASE ingredients and is compatible with wood substrates.

TEGO® Twin 4100 as a siloxane-based gemini surfactant, combines substrate wetting and anti-crater effects with some defoaming properties. It is highly compatible and suitable for a wide range of different coatings and applications.

ROSHIELD™ 3275 is specifically designed for reaction with water- dispersible polyisocyanates for wood coating applications where early hardness and sandability are important, under mild drying conditions. Unlike nitrocellulose lacquers, solventborne 2-component polyurethanes, and solventborne acid catalyzed finishes, waterborne polyurethane coatings based on this acrylic polyol have extremely low VOCs and very good early print resistance. In addition, films based on this emulsion are water- white and resistant to yellowing. ROSHIELD™ 3275 cures under ambient conditions, but heat on-line is recommended for early pack-out. Applications for this excellent, cost/performance, 2- package system include clear, pigmented and flatted systems for office and laboratory furniture, kitchen cabinets and fine furniture.