Products

UCECOAT® 7788 is a tin-free, VOC-free, aliphatic polyurethane acrylate dispersion in water. It is a robust and versatile resin ideally suited for UV/EB energy curable industrial coatings applied by spray, curtain or roll coating. UCECOAT® 7788 can be used as the sole formulation resin or in combination with other water-borne resins.

ACRYSOL™ WS-68 Emulsion is a thermosetting acrylic polymer supplied as a colloidal dispersion in water. When formulated with monomeric melamine resins, it facilitates the formulation of industrial baking enamels that offer excellent spray characteristics and film properties.

WANNATE® IT-170S is used in automotive OEM coatings, industrial coatings, and vehicle refinish applications. Applied by spray, it serves as a binder, resin, and hardener compatible with alkyds, polyacrylates, and polyester polyols.

WANNATE® IT-170B can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Based on its high hardness, it is normally mixed with WANNATE® HT series.

WANNATE® IT-170BS dissolved Aromatic 100 and n-butyl acetate (2:1), can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Based on its high hardness, it is normally mixed with WANNATE® HT series.

WANNATE® IT-170MX is used in automotive OEM coatings, industrial coatings, and vehicle refinish applications. Applied by spray, it functions as a binder, resin, and hardener compatible with alkyds, polyacrylates, and polyester polyols.

HP9825-TOFA Short Oil Alkyd is a short oil, chain stopped alkyd resin based on tall oil fatty acid. It is formulated for air-dry enamels, spray paints, and baking enamels. It exhibits good overbake resistance

CARPOL® GP-6305 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300 Da. This triol is polymerized with propylene oxide and then capped with 5% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-6305 may also be included as a component in other urethane products and formulations.

CARPOL® PGP-2740 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2740 has a functionality of two and an average molecular weight of 2700 Da. This diol is polymerized with propylene oxide and then capped with 40% ethylene oxide. The outcome is a polyol with enhanced reactivity and hydrophilicity.

HP9078-Medium Oil Alkyd is a medium oil alkyd resin based on a combination of linseed oil and soybean oil. The solvent is VMandP naphtha. The main application for this resin is in the preparation of traffic alkyd paint but it can also be used in any application that requires fast set up and good durability.

HP7130 Coconut Short Oil Alkyd based on coconut oil. It shows good compatability with nitrocellulose resins.