Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Product Code
- MITM09863
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Performance
UCECOAT® 7788 is characterized by:
- Best in class cost/performance balance
- Excellent dispersion stability
- Versatility in use
UV/EB cured properties based on UCECOAT® 7788 are characterized by the following performance properties:
- Nearly tack free after physical drying
- Excellent drying properties
- Good chemical resistance
- Balanced elasticity, hardness and toughness providing very good mechanical properties
- Chemical and stain resistance
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water.
- Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers.
- After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage.
- Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.
Other
- Appearance
- Emulsion
- Appearance (SDS)
- Low viscosity liquid
- Color (SDS)
- Translucent to opaque white
- Item Number
- Miscible in (SDS)
- Water, all proportions
- Odor (SDS)
- Slight acrylate
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Oxidizing Properties (SDS)
- None
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Hydroxyl Value 14.0 mg KOH/g mg KOH/g pH 6.5-8.5 - - Mechanical Properties
Value Units Test Method / Conditions Elongation at Break 7.2 % % at Break Tensile Modulus 163850.0 psi psi Tensile Strength 4901.0 psi psi - Physical Properties
Value Units Test Method / Conditions Density 1.15 g/mL g/mL At 20°C Glass Transition Temperature (Tg) 104.0 °C °C Particle Size max. 150.0 nm nm Viscosity max. 500.0 mPa.s mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Non-Volatile Content 38.5-41.5 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Flash Point (SDS) min. 100.0 °C °C Specific Gravity (SDS) 1.1-1.2 - at 20°C Vapor Density (SDS) min. 1.0 g/mL g/mL Air = 1 Vapor Pressure (SDS) 2.3 kPa kPa At 20°C Viscosity (SDS) max. 200.0 mPa.s mPa.s at 23°C, RPM: 50 Low viscous liquid Volatile Content (SDS) 58.5-61.5 %(W/W) %(W/W) Water pH (SDS) 6.5-8.0 -