Products

AEROSIL® R 972 W Coating is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). The product thickening efficiency of AEROSIL® R 972 W Coating ex RHE is consistent with the Waterford-produced AEROSIL® R 972. This profile is dif- ferent than the thickening profile of standard RHE quality.

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

CYMEL® U-1050-10 Resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050-10 Resin. CYMEL® U-1050-10 Resin has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes for wood.

EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). Lithographic inks based on EBECRYL® 450 display outstanding printing qualities, including excellent ink transfer, good dot definition, and proper tack and rheological properties.

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 113 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics.

DERCOLYTE® LTG is produced by polymerizing terpenes, is a low softening-point, low-volatile organic compound tacky resin. It is recommended to plasticize and to enhance adhesion of pressure sensitive adhesives.

ORGASOL® 2002 ES4 NAT 3 is a spheroldal powder of polyamide 12, with 4 as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing xcellent coneletency in parformancs.

TEGO® Rad 2330 is an efficient low-foaming radically cross-linkable substrate wetting and slip additive, providing wetting and flow properties. Recommended for broad areas of application.

AEROSIL® E 972 is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is a veryefficient rheology modifier, suitable for a broad rangeof applications. It is veryeasytodisperse.

ROSHIELD™ 3188 is a self-crosslinking acrylic copolymer designed for use in factory-applied, waterborne, interior wood coatings. It offers good early sandability, block resistance, and stain resistance, as well as extremely low microfoam entrapment. ROSHIELD™ 3188 is recommended for sanding sealers and clear topcoats, and offers excellent clarity and appearance over both dark and light woods. Its self-crosslinking chemistry is responsible for its rapid cure and excellent stain resistance.

TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect.