Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Function
- Reactive Diluent
- Product Code
- MITM00345
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® 113 is characterized by:
- Low odor
- Low viscosity
- Efficient reduction of oligomer viscosity
Good pigment wetting
UV/EB cured products based on EBECRYL® 113 are characterized by the following performance properties:
- Good reactivity
- Improved flexibility
- Decreased Tg
- Improved water resistance
- Reduced shrinkage, improved adhesion
The actual properties of UV/EB cured products also depend on the selection of the other formulation components such as oligomers, additives and photoinitiators.
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container. Wash thoroughly after handling.
- Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear liquid
- Color (SDS)
- Grayish green
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO Technical name (N.O.S.)
- Cardura acrylate
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG Technical name (N.O.S.)
- Cardura acrylate
- IMO/IMDG UN Number
- UN3082
- Item Number
- Odor (SDS)
- Ester
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- TDG Canada Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- TDG Canada Technical name (N.O.S.)
- Cardura acrylate
- TDG Canada UN Number
- UN3082
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Cardura acrylate
- USA/DOT UN Number
- UN3082
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 3.0 Gardner Gardner Gardner Color Scale Color Scale max. 3.0 Gardner Gardner ISO 6271 - Chemical Properties
Value Units Test Method / Conditions Acid Value max. 1.0 mg KOH/g mg KOH/g Epoxy Group Content max. 0.1 % % - Physical Properties
Value Units Test Method / Conditions Density 0.97 g/mL g/mL At 25°C Flash Point min. 100.0 °C °C Setaflash Surface Tension 31.9 dyn/cm dyn/cm Viscosity 90.0-150.0 mPa.s mPa.s At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.01 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C SetaFlash Closed Cup Kinematic Viscosity (SDS) 90.0-150.0 mPa.s mPa.s at 25°C Partition coefficient n-octanol/water (SDS) 4.118-4.19 - OECD 117 n-Octanol/Water Solubility In Water (SDS) 142.0 mg/L mg/L at 20°C Volatile Content (SDS) max. 0.5 % %