Products

Wayncor™ 205 is an anti corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. Its near neutral pH allows it to be used in a wide variety of formulas without a negative impact on paint stability. The fine Hegman grind (6.5 minimum) permits its use in thin film applications (4 - 10 microns) such as coil coatings and in more traditional industrial applications where the dry film thickness is higher. This fine Hegman value also allows the product to be high speed dispersed. The Wayncor™ 205 mechanism works well on both ferrous and non-ferrous substrates. Wayncor™ 205 can be used as the sole corrosion inhibitor or synergistically with other inhibitive technologies.

PARALOID™ B-1225DMC functions as a binder, resin, and dispersant in case ingredient applications.

CYMEL® 1125 resin is a highly methylated/ethylated, carboxyl-modified benzoguanamine crosslinker supplied in 2-butoxy ethanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and detergent resistance. The structure of CYMEL® 1125 resin offers superior adhesion to metal substrates. CYMEL® 1125 resin can be used in a wide range of general purpose industrial finishes. However, because CYMEL® 1125 resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc, it is recommended for use in only dark single coat applications or primers, and not in pastel colors. Benzoguanamine resins have poor resistance to UV light, hence CYMEL® 1125 is not suitable for exterior applications

ResinOLINE® BD 2 is used as a base stock and oil in drilling fluids and as an ingredient in bar soaps. It also functions as an industrial additive in alkyd resins and bitumen emulsions, improving fuel lubricity performance.

CYMEL® NF 3030 Resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA amine-free acrylic emulsion. Resulting formulas exhibit superior catalyzed pot life relative to isocyanate-based conversion varnishes. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.

Wayncor™ 229 is an effective multi-component, multi-phase synergistic corrosion inhibitor pigment. It is a chrome free product, and is compatible with all commercially available aqueous and solvent based resin systems. The recommended loading levels for water based systems and solvent based systems from 3 - 7% total formula weight.

CYMEL® U-1050 resin is a partially butylated urea resin supplied in a mixture of nbutanol and xylene. CYMEL® U-1050 resin has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes for wood.

Wayncor™ 224 is a white non-refractive, corrosion inhibitive pigment used in protective coatings systems. It is compatible with a wide assortment of commercially available resin systems. It can provide an economic alternative to standard grade zinc phosphate. Performance can vary depending upon choice of resin system, but in general the use level would be between 3 - 10% total formula weight.

CYMEL® UI-27-EI Resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. CYMEL® UI-27-EI Resin is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. CYMEL® UI-27-EI Resin is not suitable for exterior applications.

Wayncor™ 240 is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 - 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.

WANNATE® IT-170B can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Based on its high hardness, it is normally mixed with WANNATE® HT series.

Strontium Chromate 177 with the chemical formula of SrCr04, is a low dust and very low oil absorption corrosion inhibitor pigment. It is recommended for high solids primer formulations. It is characterized by a unique high apparent bulk density and is widely used in aerospace primers for aluminum protection.

CYMEL® U-1051 is a partially iso-butylated urea resin supplied in a mixture of iso-butanol and xylene. It has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes.

CYMEL® 243-3 Resin is a partially n-butylated melamine-formaldehyde crosslinking agent supplied in high flash aromatic solvent. It has excellent compatibility and is recommended for thermosetting acrylic and alkyd topcoat finishes and metal decorating systems. Its high resistivity provides wide latitude in formulating electrostatic spray finishes.

Castung™ 403 Z-3 is a bodied dehydrated castor oil (DCO) that can be used with pure and modified phenolic resins to impart alkali resistance for can linings, corrosion resistant coatings, traffic paints, ink vehicles and marine finishes. The high viscosity Castung™ 403 Z-3will yield faster processing and drying times than Castung™103 G-H. Castung™ 403 Z-3 is excellent for formulating alkyd and copolymer resins, where dehydrated castor oil is well known for its non- yellowing and outstanding color retention characteristics.