Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Function
- Crosslinking Agent
- Product Code
- MITM00282
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Benefits
- Fast cure speed
- Good adhesion properties
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
- Product Applications
- Acid curing wood coating applications
- General industrial baking applications
- Formulation Stability
- The stability of baking enamels containing CYMEL® UI-27-EI Resin can be enhanced by the addition of alcohols, amines or combination of these.
- Low molecular weight primary alcohols, such as n-butanol, are most effective.
- Recommended amines are TEA, DMEA or 2-AMP at a concentration of 0.5-1.0% on total binder solids.
- Ambient cure systems are usually stabilized only by addition of adequate amounts of primary alcohol, such as ethanol or n-butanol.
Properties
- Physical Form
- Soluble In
Technical Details & Test Data
- Catalysis Information
- CYMEL® UI-27-EI Resin may not require the addition of an acid catalyst to the formulation to obtain effective cure.
- In many instances, the acidity of the backbone polymer in the formulation is sufficient to catalyze the reaction under normal baking conditions (15-20 minutes at 120-150°C).
- If catalyst addition is required, then 0.5-1.0% of CYCAT® 4040 catalyst or CYCAT 296-9 catalyst based on total resin solids is recommended.
- For wood coating formulations cured under ambient conditions, 6-10% CYCAT 4040 catalyst on total resin solids of the formulation is sufficient to obtain fast drying behavior.
- In one-pack acid curing finishes, weak inorganic acids, such as CYCAT 296-9 catalyst, are strongly recommended.
- Backbone Polymer Selection
- CYMEL® UI-27-EI Resin is a very effective crosslinking agent for backbone polymer resins containing hydroxyl and carboxyl functional groups, such as alkyd, polyester or acrylic resins. CYMEL® UI-27-EI Resin has a high reactivity and a high tendency for self-condensation.
- Although the optimum level of CYMEL® UI-27-EI Resin in a given formulation should be determined experimentally, ratios between 25% and 35%, based on resin solids, are typically most effective in a range of polymer backbone resins.
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- CYMEL® UI-27-EI Resin has a shelf life of 720 days from date of manufacture when stored at temperatures below 32°C.
- Although low temperatures are not detrimental to stability, the viscosity of the product will increase making the resin more difficult to pump or pour.
- Product viscosity can be returned to normal by gentle warming, however, care should be taken to avoid excessive localized heating as this can cause polymerization.
Other
- Appearance (SDS)
- Viscous liquid
- Color (SDS)
- Colorless
- IATA/ICAO Proper Shipping Name
- Resin solution
- IATA/ICAO UN Number
- UN1866
- IMO/IMDG Proper Shipping Name
- Resin solution
- IMO/IMDG UN Number
- UN1866
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Formaldehyde and ethanol
- Other Hazards
- Not applicable
- Protect from Freezing
- No
- TDG Canada Proper Shipping Name
- Resin solution
- TDG Canada UN Number
- UN1866
- Temperature Control
- Yes
- USA/DOT Proper Shipping Name
- Resin solution
- USA/DOT UN Number
- UN1866
- Chemical Properties
Value Units Test Method / Conditions Free Formaldehyde Content max. 0.7 % % Titration Method - Material Composition
Value Units Test Method / Conditions Non-Volatile Content 58.0-62.0 %(W/W) %(W/W) DIN EN ISO 3251 at 100°C, 1hr, pan - Optical Properties
Value Units Test Method / Conditions Color Scale max. 50.0 APHA APHA Color Scale max. 50.0 Gardner Gardner DIN EN ISO 6271 - Physical Properties
Value Units Test Method / Conditions Storage Temperature -4.0-86.0 °F °F Viscosity 350.0-600.0 mPa.s mPa.s DIN EN ISO 3219 at 23°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 78.0 °C °C Density (SDS) 1.01 g/cm³ g/cm³ Evaporation Rate (SDS) max. 1.0 % % Flash Point (SDS) 24.0 °C °C SetaFlash Closed Cup Relative Vapor Density (SDS) min. 1.0 - Volatile Content (SDS) 21.0 %(W/W) %(W/W) - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 720.0 d d